/* $DOC$
   $AUTHOR$
      Copyright 1999 Chen Kedem <niki@actcom.co.il>
   $TEMPLATE$
      Function
   $NAME$
      dbEdit()*
   $CATEGORY$
      API
   $SUBCATEGORY$
      User interface
   $ONELINER$
      Browse records in a table
   $SYNTAX$
      dbEdit( [<nTop>], [<nLeft>], [<nBottom>], [<nRight>], [<acColumns>], [<xUserFunc>], [<xColumnSayPictures>], [<xColumnHeaders>], [<xHeadingSeparators>], [<xColumnSeparators>], [<xFootingSeparators>], [<xColumnFootings>] ) --> lOk
   $ARGUMENTS$
      <nTop> coordinate for top row display. <nTop> could range from 0
      to MaxRow(), default is 0.

      <nLeft> coordinate for left column display. <nLeft> could range
      from 0 to MaxCol(), default is 0.

      <nBottom> coordinate for bottom row display. <nBottom> could range
      from 0 to MaxRow(), default is MaxRow().

      <nRight> coordinate for right column display. <nRight> could range
      from 0 to MaxCol(), default is MaxCol().

      <acColumns> is an array of character expressions that contain
      database fields names or expressions to display in each column.
      If not specified, the default is to display all fields from the
      database in the current work area.

      <xUserFunc> is a name of a user defined function or a code block
      that would be called every time unrecognized key is been pressed or
      when there are no keys waiting to be processed and dbEdit() goes
      into idle mode. If <xUserFunc> is a character string, it must
      contain root name of a valid user define function without
      parentheses. Both the user define function or the code block should
      accept two parameters: <nMode>, <nCurrentColumn>. Both should return
      a numeric value that correspond to one of the expected return codes
      (see table below for a list of <nMode> and return codes).

      <xColumnSayPictures> is an optional picture. If <xColumnSayPictures>
      is a character string, all columns would used this value as a
      picture string. If <xColumnSayPictures> is an array, each element
      should be a character string that correspond to a picture string
      for the column with the same index. Look at the help for `@...SAY`
      to get more information about picture values.

      <xColumnHeaders> contain the header titles for each column, if this
      is a character string, all columns would have that same header, if
      this is an array, each element is a character string that contain
      the header title for one column. Header may be split to more than
      one line by placing semicolon `;` in places where you want to break
      line. If omitted, the default value for each column header is taken
      from <acColumns> or field name if <acColumns> was not specified.

      <xHeadingSeparators> is an array that contain characters that draw
      the lines separating the headers and the fields data. Instead of an
      array you can use a character string that would be used to display
      the same line for all fields. Default value is a double line.

      <xColumnSeparators> is an array that contain characters that draw
      the lines separating displayed columns. Instead of an array you can
      use a character string that would be used to display the same line
      for all fields. Default value is a single line.

      <xFootingSeparators> is an array that contain characters that draw
      the lines separating the fields data area and the footing area.
      Instead of an array you can use a character string that would be
      used to display the same line for all footers. Default is to have to
      no footing separators.

      <xColumnFootings> contain the footing to be displayed at the bottom
      of each column, if this is a character string, all columns would
      have that same footer, if this is an array, each element is a
      character string that contain the footer for one column. Footer may
      be split to more than one line by placing semicolon `;` in places
      where you want to break line. If omitted, no footer are displayed.
   $RETURNS$
      dbEdit() return .F. if there is no database in use or if the number
      of columns to display is zero, else dbEdit() return .T.
   $DESCRIPTION$
      dbEdit() display and edit records from one or more work areas in
      a grid on screen. Each column is defined by element from <acColumns>
      and is the equivalent of one field. Each row is equivalent of one
      database record.

      Following are active keys that handled by dbEdit():

      <table>
       Key              Meaning

       Left             Move one column to the left (previous field)
       Right            Move one column to the right (next field)
       Up               Move up one row (previous record)
       Down             Move down one row (next record)
       PgUp             Move to the previous screen
       PgDn             Move to the next screen
       Ctrl+PgUp        Move to the top of the file
       Ctrl+PgDn        Move to the end of the file
       Home             Move to the leftmost visible column
       End              Move to the rightmost visible column
       Ctrl+Left        Pan one column to the left
       Ctrl+Right       Pan one column to the right
       Ctrl+Home        Move to the leftmost column
       Ctrl+End         Move to the rightmost column
      </table>

      When <xUserFunc> is omitted, two more keys are active:

      <table>
       Key              Meaning

       Esc              Terminate Browse()
       Enter            Terminate Browse()
      </table>

      When dbEdit() execute <xUserFunc> it pass the following arguments:
      <nMode> and the index of current record in <acColumns>. If <acColumns>
      is omitted, the index number is the FieldName() number of the open
      database structure.

      dbEdit() <nMode> could be one of the following:

      <table>
       dbedit.ch      Meaning

       DE_IDLE        dbEdit() is idle, all movement keys have been handled.
       DE_HITTOP      Attempt to cursor past top of file.
       DE_HITBOTTOM   Attempt to cursor past bottom of file.
       DE_EMPTY       No records in work area, database is empty.
       DE_EXCEPT      Key exception.
      </table>

      The user define function or code block must return a value that tell
      dbEdit() what to do next.

      User function return codes:

      <table>
       dbedit.ch    Meaning

       DE_ABORT     Abort dbEdit().
       DE_CONT      Continue dbEdit() as is.
       DE_REFRESH   Force reread/redisplay of all data rows.
      </table>

      The user function is called once in each of the following cases:
      - The database is empty.
      - The user try to move past top of file or past bottom file.
      - Key exception, the uses had pressed a key that is not handled by dbEdit().
      - The keyboard buffer is empty or a screen refresh had just occurred
      dbEdit() is a compatibility function, it is superseded by the
      TBrowse class and there for not recommended for new applications.
   $EXAMPLES$
      // Browse a file using default values
      USE test
      dbEdit()
   $STATUS$
      S
   $COMPLIANCE$
      <xUserFunc> can take a code block value, this is a Harbour
      extension.

      CA-Cl*pper will throw an error if there's no database open, Harbour
      would return .F.

      CA-Cl*pper is buggy and will throw an error if the number of columns
      is zero, Harbour would return .F.

      The CA-Cl*pper 5.2 NG state that the return value is NIL, this is
      wrong and should be read logical.

      There is an undocumented result code (3) from the user defined
      function in CA-Cl*pper (both 87 and 5.x). This is an Append Mode which:
      "split the screen to allow data to be appended in windowed area".
      This mode is not supported by Harbour.
   $FILES$
      Header files are dbedit.ch, inkey.ch
      Library is core
   $SEEALSO$
      @...SAY, Browse(), TBrowse class, Transform()
   $END$
 */

/* $DOC$
   $AUTHOR$
      Copyright 1999 Chen Kedem <niki@actcom.co.il>
   $TEMPLATE$
      Function
   $NAME$
      Browse()
   $CATEGORY$
      API
   $SUBCATEGORY$
      User interface
   $ONELINER$
      Browse a database file
   $SYNTAX$
      Browse( [<nTop>, <nLeft>, <nBottom>, <nRight>] ) --> lOk
   $ARGUMENTS$
      <nTop> coordinate for top row display.

      <nLeft> coordinate for left column display.

      <nBottom> coordinate for bottom row display.

      <nRight> coordinate for right column display.
   $RETURNS$
      Browse() return .F. if there is no database open in this work area,
      else it return .T.
   $DESCRIPTION$
      Browse() is a general purpose database browser, without any
      thinking you can browse a file using the following keys:

      <table>
       Key              Meaning

       Left             Move one column to the left (previous field)
       Right            Move one column to the right (next field)
       Up               Move up one row (previous record)
       Down             Move down one row (next record)
       PgUp             Move to the previous screen
       PgDn             Move to the next screen
       Ctrl+PgUp        Move to the top of the file
       Ctrl+PgDn        Move to the end of the file
       Home             Move to the leftmost visible column
       End              Move to the rightmost visible column
       Ctrl+Left        Pan one column to the left
       Ctrl+Right       Pan one column to the right
       Ctrl+Home        Move to the leftmost column
       Ctrl+End         Move to the rightmost column
       Esc              Terminate Browse()
      </table>

      On top of the screen you see a status line with the following
      indication:

      <table>
       Record ###/###   Current record number / Total number of records.
       <none>           There are no records, the file is empty.
       <new>            You are in append mode at the bottom of file.
       <Deleted>        Current record is deleted.
       <bof>            You are at the top of file.
      </table>

      You should pass whole four valid coordinate, if less than four
      parameters are passed to Browse() the coordinate are default to:
      1, 0, MaxRow(), MaxCol().
   $EXAMPLES$
      // this one shows you how to browse around
      USE test
      Browse()
   $STATUS$
      S
   $COMPLIANCE$
      C
   $FILES$
      Library is core
   $SEEALSO$
      dbEdit()*, TBrowse class
   $END$
 */

/* $DOC$
   $AUTHOR$
      Copyright 1999 Chen Kedem <niki@actcom.co.il>
   $TEMPLATE$
      Function
   $NAME$
      TBrowseDB()
   $CATEGORY$
      API
   $SUBCATEGORY$
      User interface
   $ONELINER$
      Create a new TBrowse object to be used with database file
   $SYNTAX$
      TBrowseDB( [<nTop>], [<nLeft>], [<nBottom>], [<nRight>] ) --> oBrowse
   $ARGUMENTS$
      <nTop> coordinate for top row display.

      <nLeft> coordinate for left column display.

      <nBottom> coordinate for bottom row display.

      <nRight> coordinate for right column display.
   $RETURNS$
      TBrowseDB() return new TBrowse object with the specified coordinate
      and a default :SkipBlock, :GoTopBlock and :GoBottomBlock to browse
      a database file.
   $DESCRIPTION$
      TBrowseDB() is a quick way to create a TBrowse() object along with
      the minimal support needed to browse a database. Note that the
      returned TBrowse() object contain no TBColumn() objects and you need
      to add column for each field by your self.
   $EXAMPLES$
      // For a good example, look at the source code for Browse() function
      // at src/rtl/browse.prg
   $STATUS$
      S
   $COMPLIANCE$
      H
   $FILES$
      Library is core
   $SEEALSO$
      Browse(), TBColumn class, TBrowse class, TBrowseNew()
   $END$
 */