TO: Antonio, TGet problem with WinXP Themes for 2 bytes?

[Taiwan]

Hello Antonio,

I sent to you TGet samples and any solution way?

Richard

[Antonio Linares]

Richard,

The solution is to use the Class TEdit that we provided you and then start adding it method by method from Class TGet to locate where TEdit looses the two chars functionality.

The problem is that we can't test it here, so you have to do it there yourself.

[Johnny Yiu]

Antonio,

I am sure you have an extra computer laying around that you can use to test it. To setup the computer to display Chinese and input Chinese all you have to do is set the computer's default language to Traditional Chinese or Simplified Chinese in Control Panel's Regional Options.

[Antonio Linares]

Johnny,

We already tried to use XP with chinese language and it was real difficult.

You may easily modify Class TEdit, add methods to it, test it and locate where the problem comes from.

Anyhow, we may try it again,

[jhncon]

i have modified xFWH\..\TGet.prg and xHBR\..\strcase.c for supporting Big5 long time and seems OK, extracted code as following:

John M. S. Chiang


// ----- xFWH\..\TGet.prg

::lBig5 = If( !Empty(::oWnd), ::oWnd:lBig5, GetOEMCP()==950 ) // JMS

........................

METHOD KeyDown( nKey, nFlags ) CLASS TGet
......
case nKey == VK_RIGHT
nPos = ::oGet:Pos
if nPos >= Len(::oGet:Buffer) .or. ; // JMS
( ::lBig5 .and. nPos == Len(::oGet:Buffer)-1 .and. lBig5_1st( ::oGet:Buffer, nPos ) )
::GoNextGet() // JMS // ::oWnd:GoNextCtrl( ::hWnd, .t. ) // JMS
return 1
endif
if GetKeyState( VK_CONTROL )
::oGet:wordRight()
else
::oGet:right()
endif
if nPos <> ::oGet:Pos
while .t.
CallWindowProc( ::nOldProc, ::hWnd, WM_KEYDOWN, nKey, nFlags )
::GetSelPos( @nLo, @nHi )
if nHi + 1 >= ::oGet:Pos .or. ::lPassword .or. ;
nHi == nLastHi
EXIT
endif
nLastHi = nHi
end
::oGet:Pos = nHi + 1
::nPos = nHi + 1
endif
return 0
// Many thanks to HMP
...........

case nKey == VK_DELETE .or. nKey == VK_BACK

if nKey == VK_BACK .and. ::nPos == 0
::nPos := 1 // JMS necessary
::SetPos( ::nPos )
retu 0
endif
if ::lReadOnly
return 0
endif

if ::lDrag
return Super:KeyDown( nKey, nFlags )
endif

::GetSelPos( @nLo, @nHi )

// Deletes selection
if nHi != nLo
::GetDelSel( nLo, nHi )
if GetKeyState( VK_SHIFT )
CallWindowProc( ::nOldProc, ::hWnd, WM_KEYDOWN, nKey, nFlags )
endif
else
if !::lBig5 // JMS
if nKey == VK_DELETE
::oGet:Delete()
else
::oGet:BackSpace()
endif
else
if nKey == VK_DELETE // .and. !Empty(::oGet:Buffer) // revised from above 00-03-28 JMS
if lBig5_1st( ::oGet:Buffer,::nPos )
::oGet:Buffer := SubStr( ::oGet:Buffer, 1, ::nPos - 1 ) + ;
' ' + SubStr( ::oGet:Buffer, ::nPos + 2 )
::oGet:Delete()
endif
::oGet:Delete()
else
if ::nPos > 2 .and. lBig5_2nd( ::oGet:Buffer,::nPos-1 )
::oGet:Buffer := SubStr( ::oGet:Buffer, 1, ::nPos - 3 ) + ;
' ' + SubStr( ::oGet:Buffer, ::nPos )
::oGet:BackSpace()
endif
::oGet:BackSpace()
endif
endif
endif
::EditUpdate()
if ::bChange != nil
Eval( ::bChange, nKey, nFlags, Self )
endif
return 0

..............

//---------------------------------

METHOD KeyChar( nKey, nFlags ) CLASS TGet // KeyChar() runs before KeyDown()
// for ChineseBig5 1st(high_order) Chr( 161 - 254 ), 2nd(Low_order) Chr( 64 - 126, 161 - 254 )

local nHi, nLo, cStrike, lIns, nInsPos // JMS
local lAccept
local bKeyAction := SetKey( nKey )
local nDefButton, lChar := .t. // JMS

if ! Empty( ::cPicture ) .and. '@!' $ ::cPicture
nKey = Asc( Upper( Chr( nKey ) ) )
endif

if bKeyAction != nil .and. lAnd( nFlags, 16777216 ) // function Key
Eval( bKeyAction, ProcName( 4 ), ProcLine( 4 ), Self )
return 0 // Already processed, API do nothing
endif

if ::lReadOnly
if nKey == VK_ESCAPE
::oWnd:End()
endif
return 0
endif

do case
case nKey == VK_BACK // Already processed at KeyDown
If( ::nPos==0, ::SetPos( ::nPos := 1 ), ) // JMS necessary
return 0

case nKey == VK_ESCAPE // JMS to set VK_ESCAPE no Action
return 0 // but Escaped if not oGet lFocused

case nKey == VK_TAB .and. GetKeyState( VK_SHIFT )
::cStrIn := '' // JMS
::lChrHL := .f. // JMS
if ::bChange != nil
lAccept = Eval( ::bChange, nKey, nFlags, Self )
if ValType( lAccept ) == "L" .and. lAccept
if Upper( ::oWnd:ClassName() ) == "TCOMBOBOX"
::oWnd:oWnd:GoPrevCtrl( ::hWnd )
else
::GoPrevGet() // JMS // ::oWnd:GoPrevCtrl( ::hWnd, .t. ) // JMS
endif
endif
else
if Upper( ::oWnd:ClassName() ) == "TCOMBOBOX"
::oWnd:oWnd:GoPrevCtrl( ::hWnd )
else
::GoPrevGet() // JMS // ::oWnd:GoPrevCtrl( ::hWnd, .t. ) // JMS
endif
endif
return 0

case nKey == VK_TAB .or. nKey == VK_RETURN
::cStrIn := '' // JMS
::lChrHL := .f. // JMS
if ::bChange != nil
lAccept = Eval( ::bChange, nKey, nFlags, Self )
if ValType( lAccept ) == "L" .and. lAccept
::GoNextGet() // JMS // ::oWnd:GoNextCtrl( ::hWnd, .t. ) // JMS
endif
else
::GoNextGet() // JMS // ::oWnd:GoNextCtrl( ::hWnd, .t. ) // JMS
endif

#ifdef __HARBOUR__
// if nKey == VK_RETURN // Execute DEFPUSHBUTTON Action
// Super:KeyChar( nKey, nFlags ) // JMS deleted on 031020 to avoid reach PUSHBUTTON directly
// endif
#endif

return 0

case nKey >= 32 .and. nKey < 256

#ifdef __HARBOUR__
// <lk> deadkey+tab [or enter] previously pressed will cause a r/t error
if ::oGet:buffer == nil
return 0
endif
#endif

If ::oGet:Pos == nil // JMS
retu 0
endif
::cStrIn += ::oGet:Input(Chr(nKey)) // JMS :cStrIn was cut to end at same end postion of :buffer originally while input Big5 ...
::GetSelPos( @nLo, @nHi )
// Delete selection
if nHi != nLo
::lChrHL := .t. // JMS
if !( lIns := Set( _SET_INSERT ) )
Set( _SET_INSERT, .t. )
endif
*-----
::GetDelSel( nLo, nHi, @lChar ) // JMS
if !lChar
return 0
endif
::EditUpdate()
endif
if ::oGet:Type == "N" .and. Chr( nKey ) $ ".," // JMS
::oGet:ToDecPos()
elseif ::oGet:Type == "N" .and. !( Chr( nKey ) $ " -0123456789" )
return 0
else
// if ::bChange != nil // JMS, move behind for real action
// lAccept = Eval( ::bChange, nKey, nFlags, Self )
// if ValType( lAccept ) == "L" .and. ! lAccept
// return 0
// endif
// endif
if ::lBig5 .and. ::nPos == Len( ::oGet:Buffer ) .and. ( nKey >= 161 .and. nKey <= 254 ) // JMS possible Big5 1st(high_order) Chr( 161 - 254 ), but at End
if Len( ::cStrIn ) == 1 .or. ; // Big5_1st at end of effective ::cStrIn
( Len( ::cStrIn ) >= 3 .and. lBig5_2nd( ::cStrIn, Len(::cStrIn)-1 ) )
nKey := 32 // Space
endif
endif
if Set( _SET_INSERT ) .or. ::lChrHL // many thanks to HMP
if ::lBig5 .and. ::nPos < Len( ::oGet:Buffer )
if lBig5_2nd( ::oGet:Buffer,Len(::oGet:Buffer) )
::oGet:Buffer := Left( ::oGet:Buffer,Len(::oGet:Buffer)-2 ) + Space( 2 )
endif
endif
nInsPos := ::oGet:pos // JMS
::oGet:Insert( Chr( nKey ) )
if ::lChrHL .and. Len(::cStrIn) > 1
::oGet:pos := nInsPos // JMS for Selected condition, Big5 filled up in FistIn LastWrite
endif
else
cStrike := nil
if ::lBig5 .and. ::nPos < Len( ::oGet:Buffer )
if nKey >= 161 .and. nKey <= 254 // Could be 1st_Big5
if lBig5_1st( ::oGet:Buffer,::nPos+1 )
::oGet:Buffer := SubStr( ::oGet:Buffer, 1, ::nPos ) + ;
' ' + SubStr( ::oGet:Buffer, ::nPos + 3 )
endif
else
if lBig5_1st( ::oGet:Buffer,::nPos )
::oGet:Buffer := SubStr( ::oGet:Buffer, 1, ::nPos - 1 ) + ;
' ' + SubStr( ::oGet:Buffer, ::nPos + 2 )
cStrike := ' '
endif
endif
endif
::oGet:Overstrike( Chr(nKey) )
if cStrike != nil
::oGet:Overstrike( cStrike ) // JMS
::oGet:Pos -- // JMS
::nPos --
endif
endif
if ::lBig5 .and. ::nPos == Len( ::oGet:Buffer ) .and. lBig5_2nd( ::oGet:Buffer,::nPos )
::oGet:Pos -- // JMS
::nPos --
endif
if Len( ::cStrIn ) > 1 // to keep Caret width after Big5 Input
DestroyCaret()
If( Set( _SET_INSERT ), CreateCaret( ::hWnd, 0, 5, ::nGetChrHeight()-1 ),;
CreateCaret( ::hWnd, 0, 2, ::nGetChrHeight()-1 ) )
ShowCaret( ::hWnd )
endif
if ::bChange != nil
lAccept = Eval( ::bChange, nKey, nFlags, Self )
if ValType( lAccept ) == "L" .and. ! lAccept
return 0
endif
endif
endif
if ::oGet:Rejected
MsgBeep()
endif
::EditUpdate()
if ::oGet:TypeOut
if ! Set( _SET_CONFIRM )
::oWnd:nLastKey = VK_RETURN // VK_DOWN 17/10/95
::GoNextGet() // JMS // ::oWnd:GoNextCtrl( ::hWnd, .t. ) // JMS
::cStrIn := '' // JMS
::lChrHL := .f. // JMS
else
MsgBeep()
endif
endif
*-------
if nHi != nLo .and. !lIns // JMS
Set( _SET_INSERT, .f. )
if ::oGet:TypeOut
DestroyCaret()
CreateCaret( ::hWnd, 0, 2, ::nGetChrHeight()-1 ) // JMS
ShowCaret( ::hWnd )
endif
endif

otherwise
::cStrIn := '' // JMS
::lChrHL := .f. // JMS
return Super:KeyChar( nKey, nFlags )

endcase


return 0

//-------------------------------------------------------

// for ChineseBig5 1st(high_order) Chr( 161 - 254 ), 2nd(Low_order) Chr( 64 - 126, 161 - 254 )
BOOL ulBig5_2nd( unsigned char * aStr, int nPos, int nLen )
{
int nn ;
unsigned int nAsc1 ;
unsigned int nAsc2 ;

if( nLen < nPos )
return FALSE ;
else if( nPos == 1 )
return FALSE ;
else if( nPos == 2 )
{
nAsc1 = aStr[0] ;
nAsc2 = aStr[1] ;

if( ( nAsc1 >= 161 && nAsc1 <= 254 ) &&
( ( nAsc2 >= 64 && nAsc2 <= 126 ) || ( nAsc2 >= 161 && nAsc2 <= 254 ) ) )
return TRUE ;
else
return FALSE ;
}
else
{
nAsc1 = aStr[nPos-2] ;
nAsc2 = aStr[nPos-1] ;

if( ( nAsc2 < 64 || ( nAsc2 > 126 && nAsc2 < 161 ) || nAsc2 > 254 ) )
return FALSE ;
else if ( nAsc1 < 161 || nAsc1 > 254 )
return FALSE ;
else
{
for( nn = 1 ; nn < nPos; nn++ )
{
nAsc1 = aStr[nn-1] ;
nAsc2 = aStr[nn] ;

if( nAsc1 >= 161 && nAsc1 <= 254 )
{
if( ( nAsc2 >= 64 && nAsc2 <= 126 ) || ( nAsc2 >= 161 && nAsc2 <= 254 ) )
{
if( nn+1 == nPos )
return TRUE ;
else if( nn < nPos-1 )
nn ++ ;
}
}
};
if( nn >= nPos )
return FALSE ;
}
}
return FALSE ;
}

//-----------------------------------------------

HB_FUNC( LBIG5_1ST ) // lBig5_1st( cString, nPos )
{
unsigned char * aStr = (unsigned char * ) hb_parc( 1 ) ;
int nPos = hb_parni( 2 ) ;
int nLen = hb_parclen( 1 ) ;
unsigned int nAsc1 ;
if( nPos < nLen )
{
nAsc1 = aStr[nPos-1] ;
if( ( nAsc1 >= 161 && nAsc1 <= 254 ) && ulBig5_2nd( aStr, nPos+1, nLen ) )
hb_retl(TRUE);
else
hb_retl(FALSE);
}
else
hb_retl(FALSE);
}

//-----------------------------------------------

HB_FUNC( LBIG5_2ND ) // lBig5_2nd( cString, nPos )
{
hb_retl( ulBig5_2nd( (unsigned char * ) hb_parc( 1 ), hb_parni( 2 ), hb_parclen( 1 ) ) ) ;
}



//-----------------------------------------------

xHBR\..\rtl\strcase.c modified for Big5

// Big5 1st(high_order) Chr( 161 - 254 ), 2nd(Low_order) Chr( 64 - 126, 161 - 254 )
// JMS modified for trailer byte of lBig5 not influenced by Upper/Lower

/* converts szText to lower case. Does not create a new string! */
HB_EXPORT char * hb_strLower( char * szText, ULONG ulLen ) // JMS
{
ULONG i;
int nAsc1 ;
int nAsc2 ;
BOOL lBig5_1st = FALSE ;
BOOL lBig5_2nd = FALSE ;

HB_TRACE(HB_TR_DEBUG, ("hb_strLower(%s, %lu)", szText, ulLen));

if( GetOEMCP()==950 ) // lBig5
{ for( i = 0; i < ulLen; i++ )
{ if( szText < 0 )
nAsc1 = 256+szText ;
else
nAsc1 = szText ;
if( i+1 < ulLen )
{ if( szText[i+1] < 0 )
nAsc2 = 256+szText[i+1] ;
else
nAsc2 = szText[i+1] ;
};
if( i == 0 )
{ if( i+1 < ulLen && ( nAsc1 >= 161 && nAsc1 <= 254 ) && ( ( nAsc2 >= 64 && nAsc2 <= 126 ) || ( nAsc2 >= 161 && nAsc2 <= 254 ) ) )
{ lBig5_1st = TRUE ; // Self
lBig5_2nd = FALSE ; // Self
};
}
else
{ if( lBig5_1st ) // former chr
{ lBig5_1st = FALSE ; // Self
lBig5_2nd = TRUE ; // Self
}
else
{ if( i+1 < ulLen && ( nAsc1 >= 161 && nAsc1 <= 254 ) && ( ( nAsc2 >= 64 && nAsc2 <= 126 ) || ( nAsc2 >= 161 && nAsc2 <= 254 ) ) )
{ lBig5_1st = TRUE ; // Self
lBig5_2nd = FALSE ; // Self
};
};
};
if( lBig5_2nd == FALSE )
szText[ i ] = tolower( szText[ i ] );
};
}
else
{
#ifndef HB_CDP_SUPPORT_OFF
if( hb_cdp_page->nChars )
for( i = 0; i < ulLen; i++ )
szText[ i ] = (char) hb_cdp_page->s_lower[szText&255];
else
#endif
for( i = 0; i < ulLen; i++ )
szText[ i ] = tolower( (BYTE) szText[ i ] );
} // JMS
return szText;
}

HB_EXPORT char * hb_strLowerCopy( char * szText, ULONG ulLen )
{
char *szCopy = (char*) hb_xgrab( ulLen + 1 );
ULONG i;

HB_TRACE(HB_TR_DEBUG, ("hb_strLowerCopy(%s, %lu)", szText, ulLen));

#ifndef HB_CDP_SUPPORT_OFF
if( hb_cdp_page->nChars )
for( i = 0; i < ulLen; i++ )
szCopy[ i ] = (char) hb_cdp_page->s_lower[szText&255];
else
#endif
for( i = 0; i < ulLen; i++ )
szCopy[ i ] = tolower( (BYTE) szText[ i ] );
szCopy[ i ] = '\0';

return szCopy;
}

HB_EXPORT char * hb_strUpperCopy( char * szText, ULONG ulLen )
{
char *szCopy = (char*) hb_xgrab( ulLen + 1 );
ULONG i;

HB_TRACE(HB_TR_DEBUG, ("hb_strUpperCopy(%s, %lu)", szText, ulLen));

#ifndef HB_CDP_SUPPORT_OFF
if( hb_cdp_page->nChars )
for( i = 0; i < ulLen; i++ )
szCopy[ i ] = (char) hb_cdp_page->s_upper[szText&255];
else
#endif
for( i = 0; i < ulLen; i++ )
szCopy[ i ] = toupper( (BYTE) szText[ i ] );
szCopy[ i ] = '\0';

return szCopy;
}

/* converts szText to upper case. Does not create a new string! */
HB_EXPORT char * hb_strUpper( char * szText, ULONG ulLen ) // JMS
{
ULONG i;
int nAsc1 ;
int nAsc2 ;
BOOL lBig5_1st = FALSE ;
BOOL lBig5_2nd = FALSE ;

HB_TRACE(HB_TR_DEBUG, ("hb_strUpper(%s, %lu)", szText, ulLen));

if( GetOEMCP()==950 ) // lBig5
{ for( i = 0; i < ulLen; i++ )
{ if( szText < 0 )
nAsc1 = 256+szText ;
else
nAsc1 = szText ;
if( i+1 < ulLen )
{ if( szText[i+1] < 0 )
nAsc2 = 256+szText[i+1] ;
else
nAsc2 = szText[i+1] ;
};
if( i == 0 )
{ if( i+1 < ulLen && ( nAsc1 >= 161 && nAsc1 <= 254 ) && ( ( nAsc2 >= 64 && nAsc2 <= 126 ) || ( nAsc2 >= 161 && nAsc2 <= 254 ) ) )
{ lBig5_1st = TRUE ; // Self
lBig5_2nd = FALSE ; // Self
};
}
else
{ if( lBig5_1st ) // former chr
{ lBig5_1st = FALSE ; // Self
lBig5_2nd = TRUE ; // Self
}
else
{ if( i+1 < ulLen && ( nAsc1 >= 161 && nAsc1 <= 254 ) && ( ( nAsc2 >= 64 && nAsc2 <= 126 ) || ( nAsc2 >= 161 && nAsc2 <= 254 ) ) )
{ lBig5_1st = TRUE ; // Self
lBig5_2nd = FALSE ; // Self
};
};
};
if( lBig5_2nd == FALSE )
szText[ i ] = toupper( szText[ i ] );
};
}
else
{
#ifndef HB_CDP_SUPPORT_OFF
if( hb_cdp_page->nChars )
for( i = 0; i < ulLen; i++ )
szText[ i ] = (char) hb_cdp_page->s_upper[szText&255];
else
#endif
for( i = 0; i < ulLen; i++ )
szText[ i ] = toupper( (BYTE) szText[ i ] );
} // JMS
return szText;
}

//------------------------------

[Johnny Yiu]

i have modified xFWH\..\TGet.prg and xHBR\..\strcase.c for supporting Big5 long time and seems OK, extracted code as following:

John M. S. Chiang

John,

Thanks, I will try it. The only change to your code is to test for GB2313 as well.

Johnny Yiu

[Taiwan]

Hello John,

Sounds good News.
I will try it again.

Regards,

Richard

[Johnny Yiu]

Johnny,

You may easily modify Class TEdit, add methods to it

Antonio,

When you say add methods to TEdit from TGet do you mean just cut and paste the code from tget to tedit? If that is the case it mean most of the code from tget need to be apply to tedit, am I right?

Johnny

[Antonio Linares]

Johnny,

Yes.

We appreciate if yall of ou can test John M. S. Chiang changes and provide feedback about its usability. Thanks.

[Taiwan]

Hello John M. S.

I test your suggestion code.Same problem.

I don't know,but MiniGUI work fine of TEdit component.

Regards,

Richard

[Antonio Linares]

Richard,

As I have explained preivously, it may be needed to add methods from Class TGet to Class TEdit until we locate where the problem comes from.

We are going to try to install here a Chinese Windows, but we even don't know how to type a two keystrokes character. Could you explain it ? thanks.

[Taiwan]

Hello Antonio,

I will send screen shots to you about how to input Chinese and start IMME.

Regards,

Richard

[Johnny Yiu]

// for ChineseBig5 1st(high_order) Chr( 161 - 254 ), 2nd(Low_order) Chr( 64 - 126, 161 - 254 )
BOOL ulBig5_2nd( unsigned char * aStr, int nPos, int nLen )
{
int nn ;
unsigned int nAsc1 ;
unsigned int nAsc2 ;

if( nLen < nPos )
return FALSE ;
else if( nPos == 1 )
return FALSE ;
else if( nPos == 2 )
{
nAsc1 = aStr[0] ;
nAsc2 = aStr[1] ;

if( ( nAsc1 >= 161 && nAsc1 <= 254 ) &&
( ( nAsc2 >= 64 && nAsc2 <= 126 ) || ( nAsc2 >= 161 && nAsc2 <= 254 ) ) )
return TRUE ;
else
return FALSE ;
}
else
{
nAsc1 = aStr[nPos-2] ;
nAsc2 = aStr[nPos-1] ;

if( ( nAsc2 < 64 || ( nAsc2 > 126 && nAsc2 < 161 ) || nAsc2 > 254 ) )
return FALSE ;
else if ( nAsc1 < 161 || nAsc1 > 254 )
return FALSE ;
else
{
for( nn = 1 ; nn < nPos; nn++ )
{
nAsc1 = aStr[nn-1] ;
nAsc2 = aStr[nn] ;

if( nAsc1 >= 161 && nAsc1 <= 254 )
{
if( ( nAsc2 >= 64 && nAsc2 <= 126 ) || ( nAsc2 >= 161 && nAsc2 <= 254 ) )
{
if( nn+1 == nPos )
return TRUE ;
else if( nn < nPos-1 )
nn ++ ;
}
}
};
if( nn >= nPos )
return FALSE ;
}
}
return FALSE ;
}

//-----------------------------------------------

HB_FUNC( LBIG5_1ST ) // lBig5_1st( cString, nPos )
{
unsigned char * aStr = (unsigned char * ) hb_parc( 1 ) ;
int nPos = hb_parni( 2 ) ;
int nLen = hb_parclen( 1 ) ;
unsigned int nAsc1 ;
if( nPos < nLen )
{
nAsc1 = aStr[nPos-1] ;
if( ( nAsc1 >= 161 && nAsc1 <= 254 ) && ulBig5_2nd( aStr, nPos+1, nLen ) )
hb_retl(TRUE);
else
hb_retl(FALSE);
}
else
hb_retl(FALSE);
}

//-----------------------------------------------

HB_FUNC( LBIG5_2ND ) // lBig5_2nd( cString, nPos )
{
hb_retl( ulBig5_2nd( (unsigned char * ) hb_parc( 1 ), hb_parni( 2 ), hb_parclen( 1 ) ) ) ;
}

John,

I have problem compiling the above code does it go into tget.prg?

One of the error is:
tget.prg(1623) Error E0030 Syntax error: "parse error at 'ULBIG5_2ND'"

Am I missing include file?

[Johnny Yiu]

Richard,

We are going to try to install here a Chinese Windows, but we even don't know how to type a two keystrokes character. Could you explain it ? thanks.

May be it would be easier just to cut and paste the Chinese words from a text file.

I don't think you want to install Chinese Windows because everything would be in Chinese. You will have a hard time setting it up and running it. The best way is to install an English or Spanish Windows and set its default and system locale to Chinese. That is how I setup my Windows. Yes I can read and write Chinese but I can not understand those Chinese translated technical terms!

[Taiwan]

Hello Johnny,

My friend test John solution not work.

Chinese and Korea or any ASIA have 2 bytes character.
So we need to change TGet and MGet code.
Support 2 bytes for control of key( Left/del/right/backspace.. )
Because default work 1 byte.

Now, We fix TGet/MGet work fine for any Windows OS.
In WinXP, If we have not add Themes style and work fine.
I test MiniGUI and What32 for xHarbour work fine.
Just guess why FWH not work with WinXP themes.
Different MiniGUI/What32 have Standar TEdit/TMaskEdit component
I have easy think them can and FWH should be can.

Just Talk.

Regards,

Richard