Toolbar Images does NOT display LNK4088 ERROR

[shri_fwh]

Hi ,


Compiled the toolbar3.prg samples in MSVC/Harbour env. It executes fine but Images does not display on the Toolbar. MSVC Compiler gives warning LNK4088 ERROR.
Please provide the solution for this. Thanks in advance...!

Thanks
Shridhar

[Antonio Linares]

Shridhar,

I just tested samples/buildh32.bat toolbar3 and it worked fine.

Have you used buildh32.bat to build it ?

[shri_fwh]

Hi Antoino ,

As you know that I am UEStudio Setup. Compiled the code from UEStudio. I am not sure the settings.


Thanks
Shridhar

[shri_fwh]

Hi Antonio ,

I believe that the below setting would be cause but I am not sure.

#SDKPATH = "c:\Program Files\Microsoft SDKs\Windows\v7.0A" Commented
SDKPATH = "C:\Program Files\Windows Kits\8.0\Lib\win8\um\x86" Using....

Downloaded MSVC express edition.

Thanks
Shridhar

[shri_fwh]

Hi All ,

Could you please let me know whether MSVC expression edition will work with Harbour ? As I have downloaded latest Express edition and installed. It looks like for Windows 8 NOT for Windows 7. Because it does not create the SDK sub folder after installation. Any Idea why it does not create the folder ?

Thanks
Shridhar

[Richard Chidiak]

Shridhar

I have msvc 2012 express edition installed on a pc with windows 7 and it works OK

Here is the application file for uestudio, please adapt the directories especially the harbour one as i install harbour differently,

Also please note i have Msvc 2010 express edition installed on the same computer

Hth

Richard

Code: Select all

# --------- Harbour y FWH configuration --------
# --- general --------------------------------------
# $P  - project name
# $Pp - path to project directory
# $Pn - project name
# --- compile --------------------------------------
# $I  - input full name
# $Ip - input path
# $In - input name
# $Ie - input extension
# $O  - output file
# $Op - path to output file
# $On - output filename (without path)
# $Oe - output extension
# $R  - release/debug setting for compiler
# --- build ----------------------------------------
# $T  - target full name
# $Tp - target path
# $Tn - target name
# $O  - output file
# $Op - path to output file
# $On - output filename (without path)
# $Oe - output extension
# $R  - release/debug setting for linker

[Settings]
Target = 
Category&01 = DEFAULT RUN CONFIGURATION
Working Directory =.
Command Line Arguments =

Category&02 = Harbour Options
Automatic Memvar Declaration = no|yes
Variables Are Assumed = no|yes
Generate Preprocessed Output = no|yes
Warning Level = 1|2|3|4|0
User Include Path =
User Defines =

Compiler Options =
Linker Options =

Excluded Files = Excludes

[SettingsInfo]
Target = Provides a space for you to specify an output file and location of the program that the linker creates.
Working Directory = Provides a space for you to specify the directory in which executing occurs. If you do not specify a directory, executing occurs in the directory where the executable is located.
Command Line Arguments = Provides a space for you to specify command-line arguments you want to pass to the program at startup.
Compiler Options = Provides a space for you to specify an additional compiler options.
User Defines = Shows the switches the tool will use to build. Use ';' as delimiter.
Linker Options = Provides a space for you to specify an additional linker options.
Excluded Files = This will exclude the file(s) included in this UE project group from the build.

[SettingsReps]
User Defines = @[;|-D%s]
Automatic Memvar Declaration = no=|yes=/a
Variables Are Assumed = no=|yes=/v
Generate Preprocessed Output = no=|yes=/p
User Include Path = ^^@[;|;%s]
User Include Path&1 = ^^@[;| /i%s]
Use Multi Thread Library = no|yes
Warning Level = @/w%s

[Variables]
FWH = c:\fwh
HPATH = c:\Harbour
CPATH = "c:\Program Files (x86)\Microsoft Visual Studio 11.0\VC"
CPATHIDE = C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE
SDKPATH = "c:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A"

HPATHL = $(HPATH)\LIB\win\msvc       --------------------------------------------------------------> change here please to adapt your installation
CPATHL = $(CPATH)\LIB
SDKPATHL = $(SDKPATH)\LIB

HOPT = /n /gc0 /q $(Compiler Options) /i$(HPATH)\INCLUDE $(User Include Path&1) $(User Defines) $(Automatic Memvar Declaration) $(Variables Are Assumed) $(Generate Preprocessed Output) $(Warning Level)
COPT = -TP -W3 -c -I$(HPATH)\INCLUDE

LOPT = /nologo /subsystem:windows /force:multiple /NODEFAULTLIB:libc
LIBS1 = $(FWH)\LIB\FiveH32.lib $(FWH)\LIB\FiveHC32.lib 
LIBS2 = $(HPATHL)\hbrtl.lib $(HPATHL)\hbvm.lib $(HPATHL)\gtgui.lib $(HPATHL)\hblang.lib $(HPATHL)\hbmacro.lib $(HPATHL)\hbrdd.lib $(HPATHL)\rddntx.lib $(HPATHL)\rddcdx.lib $(HPATHL)\rddfpt.lib $(HPATHL)\hbsix.lib $(HPATHL)\hbdebug.lib $(HPATHL)\hbcommon.lib $(HPATHL)\hbpp.lib $(HPATHL)\xhb.lib $(HPATHL)\png.lib $(HPATHL)\hbzlib.lib $(HPATHL)\hbcpage.lib $(HPATHL)\hbwin.lib $(HPATHL)\hbct.lib $(HPATHL)\hbcplr.lib $(HPATHL)\hbpcre.lib $(HPATHL)\minizip.lib $(HPATHL)\hbziparc.lib $(HPATHL)\hbmzip.lib $(HPATHL)\hbtip.lib
LIBS3 = $(SDKPATHL)\kernel32.lib $(SDKPATHL)\user32.lib $(SDKPATHL)\gdi32.lib $(SDKPATHL)\winspool.lib $(SDKPATHL)\comctl32.lib $(SDKPATHL)\comdlg32.lib $(SDKPATHL)\advapi32.lib $(SDKPATHL)\shell32.lib $(SDKPATHL)\ole32.lib $(SDKPATHL)\oleaut32.lib $(SDKPATHL)\uuid.lib $(SDKPATHL)\odbc32.lib $(SDKPATHL)\odbccp32.lib $(SDKPATHL)\iphlpapi.lib $(SDKPATHL)\mpr.lib $(SDKPATHL)\version.lib $(SDKPATHL)\wsock32.lib $(SDKPATHL)\msimg32.lib $(SDKPATHL)\oledlg.lib $(SDKPATHL)\psapi.lib $(SDKPATHL)\gdiplus.lib $(SDKPATHL)\winmm.lib $(SDKPATHL)\WS2_32.LIB
LIBS = $(LIBS1) $(LIBS2) $(LIBS3)

[Environment]
PATH = $(HPATH)\BIN;$(CPATH)\BIN;$(SDKPATH)\BIN;$(CPATHIDE);%PATH%
INCLUDE = $(FWH)\INCLUDE;$(HPATH)\INCLUDE ;$(CPATH)\INCLUDE;$(SDKPATH)\INCLUDE
LIB = $(HPATHL);$(CPATHL);$(SDKPATHL);$(FWH)\LIB
BuildMode = %UESMode%

[General]
TargetExt = .EXE
ReleaseOut = Release
DebugOut = Debug
UseFullPaths = 1
UseDosNames = 0
Excludes = $(Excluded Files)
GenerateEDGroup=$(External Dependencies)
.CPP = .C

[MakeCommands]
run = Execute Application
makef = Show Makefile

[Execute Application]
Title = Execute $T
Cmd0 = $(Command Line Arguments)
Depends = $T
ShowWindow = 1
DisplayConsole = 0

[Show Makefile]
Title=Show makefile
Cmd0=uestudio makefile
ShowWindow=1
DisplayConsole=0

[InsertFiles]

[FileGroups]
FGO = .obj;
FGR = .res;
FGL = .lib;
FGD = .def;

[GroupFormats]
FGO = %s
FGR = %s
FGL = %s

[Build]
Out = $T
Depends = $FGO $FGR
DebugFlag = 
ReleaseFlag = 
Cmd0 = $(CPATH)\BIN\LINK $(LOPT) $FGO $FGR $(LIBS1) $(LIBS2) $(LIBS4) "$(SDKPATHL)"\kernel32.lib "$(SDKPATHL)"\user32.lib "$(SDKPATHL)"\gdi32.lib "$(SDKPATHL)"\winspool.lib "$(SDKPATHL)"\comctl32.lib "$(SDKPATHL)"\comdlg32.lib "$(SDKPATHL)"\advapi32.lib "$(SDKPATHL)"\advapi32.lib "$(SDKPATHL)"\shell32.lib "$(SDKPATHL)"\ole32.lib "$(SDKPATHL)"\oleaut32.lib "$(SDKPATHL)"\uuid.lib "$(SDKPATHL)"\odbc32.lib "$(SDKPATHL)"\odbccp32.lib "$(SDKPATHL)"\iphlpapi.lib "$(SDKPATHL)"\mpr.lib "$(SDKPATHL)"\version.lib "$(SDKPATHL)"\wsock32.lib "$(SDKPATHL)"\msimg32.lib "$(SDKPATHL)"\oledlg.lib "$(SDKPATHL)"\psapi.lib "$(SDKPATHL)"\gdiplus.lib "$(SDKPATHL)"\winmm.lib "$(SDKPATHL)"\ws2_32.lib
[.PRG]
Out = $In.c
DebugFlag = /b
ReleaseFlag = 
Cmd0 = $(HPATH)\BIN\harbour $I $(HOPT) $R /o$O

IncFiles = 1
CaseSensitive = 0
IncDirs = .;$(INCLUDE);
IncKeyWords = #include;
Comments = /*.*/.//.eol.

[.C]
Out = $In.obj
Cmd0 = $(CPATH)\BIN\cl.exe $(COPT) $I 

[.RC]
Out = $In.res
Cmd0 = $(SDKPATH)\bin\rc -r -fo$O $I

IncFiles = 1
CaseSensitive = 0
IncDirs = .;$(INCLUDE);
IncKeyWords = #include;
Comments = /*.*/.//.eol.

 

[shri_fwh]

Hi Richard ,

On my system this SDKPATH = "c:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A" folder does not have any files.
I do not know why ?

So for that I am using this SDKPATH = "C:\Program Files\Windows Kits\8.0\Lib\win8\um\x86" folder. Which is created by Visual Stuido exp edition installation.

Thanks
Shridhar

[Richard Chidiak]

Shridhar

probably these files have been installed by Msvc 2010 express

My advice is to install also Msvc 2010 express

I have both editions working

Richard

[shri_fwh]

Hi Richard ,

But If we install 2 Editions on the same machine then we will not be sure that which is version really working. I beleive that MSVC 2012 should work properly.

Thanks
Shridhar

[shri_fwh]

Hi All ,

I am not using still toolbar and struggling to display images on the Ttool bar button. I do not see any images on the toolbar. This time I am using Borland C++ 582 but still there is same issue. I do not know whats going wrong. I copied bitmap folder also from FWH folder to my application folder but still it does not work.

Code : FWH/SAMPLES/toolbar3.prg

Thanks
Shridhar

[shri_fwh]

Hi All ,

Apologize to all. It was my mistake. I had not included the resource file into list so that is why it was not displaying the images.

Now I have included the resource file and it working fine.


Thanks
Shridhar