Objects that disappear within the control Group (SOLVED)
Objects that disappear within the control Group (SOLVED)
Good day!
Rebuild the system using the FWH1112 and access a client machine and checked the problem of disappearing objects within the Group.
As you can see on screen, I send the links below:
http://www.salc.com.br/atual/erro_fwh1 ... quina.jpg
A screen of my machine with windows xp 32 bits, the other is the screen of the client with the same operating system.
Already configured in Group PellesC to transparent, put the parameter in the code transparent and so far the problem persists.
Any idea of solution?
Thank you!
Rebuild the system using the FWH1112 and access a client machine and checked the problem of disappearing objects within the Group.
As you can see on screen, I send the links below:
http://www.salc.com.br/atual/erro_fwh1 ... quina.jpg
A screen of my machine with windows xp 32 bits, the other is the screen of the client with the same operating system.
Already configured in Group PellesC to transparent, put the parameter in the code transparent and so far the problem persists.
Any idea of solution?
Thank you!
Last edited by tiaofw on Tue Feb 12, 2013 5:15 pm, edited 1 time in total.
Contagem/Brazil
FWH/xharbour 15.12/PELLES C, MED, DBF
FWH/xharbour 15.12/PELLES C, MED, DBF
Re: Objects that disappear within the control Group
Hello,
Did you tested with FW 11.11?.
Please, look at http://forums.fivetechsupport.com/viewt ... lit=tgroup
Did you tested with FW 11.11?.
Please, look at http://forums.fivetechsupport.com/viewt ... lit=tgroup
FWH 11.11, Harbour 3.1 and Borland C++ 5.82
Re: Objects that disappear within the control Group
ukservice wrote:Hello,
Did you tested with FW 11.11?.
Please, look at http://forums.fivetechsupport.com/viewt ... lit=tgroup
Good afternoon!
I tried to use SetDlgGradient ({{1, RGB (199, 216, 237), RGB (237, 242, 248)}}), but it caused unwanted effects on the colors throughout the system.
see:
http://www.salc.com.br/atual/erro_use_s ... adient.jpg
Not tested in FWH1111, has something in 11.11 which was not corrected in 11:12?
Thank you!
Contagem/Brazil
FWH/xharbour 15.12/PELLES C, MED, DBF
FWH/xharbour 15.12/PELLES C, MED, DBF
- Antonio Linares
- Site Admin
- Posts: 37481
- Joined: Thu Oct 06, 2005 5:47 pm
- Location: Spain
- Contact:
Re: Objects that disappear within the control Group
In your RC dialogs please place the GROUPBOX before the controls that it contains
Re: Objects that disappear within the control Group
Good night!
I did as you suggested!
But the overriding control Group continues on the other controls, as shown in previous screens!
Show below the screen PellesC for the analysis:
http://www.salc.com.br/atual/telaconfig1.jpg
http://www.salc.com.br/atual/telaconfig2.jpg
And the piece of source code where the control group box is enabled:
Recalling that the problem occurs on some machines with WindowsXP and not others!
Thanks!
I did as you suggested!
But the overriding control Group continues on the other controls, as shown in previous screens!
Show below the screen PellesC for the analysis:
http://www.salc.com.br/atual/telaconfig1.jpg
http://www.salc.com.br/atual/telaconfig2.jpg
And the piece of source code where the control group box is enabled:
Code: Select all
REDEFINE GROUP oGroup ID 114 color RGB(255, 0, 0), RGB(182,221,199) of odlg_ped FONT oFont1 PROMPT "Configuração Retaguarda" TRANSPARENT
REDEFINE radio orad var v_retaguar ID 801, 803 COLOR RGB(0, 0, 0), RGB(182,221,199) of odlg_ped UPDATE
REDEFINE SAY ID 38 color RGB(0, 0, 0), RGB(182,221,199) of odlg_ped FONT oFont1 UPDATE
REDEFINE get ogetdir var v_dirserver picture '@!' ID 216 of odlg_ped ;
color get_frente,get_fundo BITMAP "pastas" ;
Action (v_dirserver:=if(empty(dir_teste:= ;
cgetdir32('Selecione o Diretório',v_dirserver)), ;
v_dirserver,dir_teste),odlg_ped:update(),sysrefresh()) ;
update when if(v_retaguar == 1, .t., ;
if(v_retaguar # 1, (v_dirserver := space(len(v_dirserver)), ;
ogetdir:refresh(), sysrefresh(), .f.), .t.))
ACTIVATE DIALOG odlg_ped CENTERED ON INIT MudarFoco(@oFld_SPED)
return nil
function MudarFoco(oFld_SPED)
oFld_SPED:aDialogs[1]:bStart:={|| oFld_SPED:aDialogs[1]:SetFocus() }
oFld_SPED:refresh(.t.)
return(NIL)
Thanks!
Contagem/Brazil
FWH/xharbour 15.12/PELLES C, MED, DBF
FWH/xharbour 15.12/PELLES C, MED, DBF
- Antonio Linares
- Site Admin
- Posts: 37481
- Joined: Thu Oct 06, 2005 5:47 pm
- Location: Spain
- Contact:
Re: Objects that disappear within the control Group
Please post your RC file here as text, so we can review it, thanks
Re: Objects that disappear within the control Group
Antonio,
I just finished and included the RESOURCE-part.
There is NO problem !!!
All included Controls are working fine ( transparent )
with any selected Background-combination from Code and Resource.
A Group-test ( Dialog and TFolderEx ) is included.
Still a little bit Finetuning needed.
I tested to the Limit, but couldn't detect a Problem.
I just noticed a little Problem with BtnBmp Prompt Auto-Linefeed ( not centered )
like You can see in the Main-Screenshot.
REDEFINE BTNBMP oBtn2 ;
ID 610 OF oDlg1 ;
NOBORDER ;
PROMPT "Exit + &Save" ;
ACTION ( SAVE_INI(), oDlg1:End() ) ;
FILENAME c_path + "\Images\Save.Bmp" ;
FONT oBrwFont 2007 ;
LEFT
oBtn2:lTransparent := .t.
oBtn2:cToolTip = { "Save Selections" + CRLF + "to INI-File","Save", 1, CLR_BLACK, 14089979 }
oBtn2:SetColor( 0, )
I changed to :
PROMPT "Exit and" + CRLF +" &Save" ;
PROMPT "&Exit NO " + CRLF + "Save" ;
see BtnBmp ( bottom ) without CRLF in Promts :
Best Regards
Uwe
I just finished and included the RESOURCE-part.
There is NO problem !!!
All included Controls are working fine ( transparent )
with any selected Background-combination from Code and Resource.
A Group-test ( Dialog and TFolderEx ) is included.
Still a little bit Finetuning needed.
I tested to the Limit, but couldn't detect a Problem.
I just noticed a little Problem with BtnBmp Prompt Auto-Linefeed ( not centered )
like You can see in the Main-Screenshot.
REDEFINE BTNBMP oBtn2 ;
ID 610 OF oDlg1 ;
NOBORDER ;
PROMPT "Exit + &Save" ;
ACTION ( SAVE_INI(), oDlg1:End() ) ;
FILENAME c_path + "\Images\Save.Bmp" ;
FONT oBrwFont 2007 ;
LEFT
oBtn2:lTransparent := .t.
oBtn2:cToolTip = { "Save Selections" + CRLF + "to INI-File","Save", 1, CLR_BLACK, 14089979 }
oBtn2:SetColor( 0, )
I changed to :
PROMPT "Exit and" + CRLF +" &Save" ;
PROMPT "&Exit NO " + CRLF + "Save" ;
see BtnBmp ( bottom ) without CRLF in Promts :
Best Regards
Uwe
Since 1995 ( the first release of FW 1.9 )
i work with FW.
If you have any questions about special functions, maybe i can help.
i work with FW.
If you have any questions about special functions, maybe i can help.
Re: Objects that disappear within the control Group
Good afternoon!
The following code. RC of the screen where the problem appears:
Noting that the client is Windows XP with the "SERVICE PACK 2," I do not know if this has any influence.
Thank you!
The following code. RC of the screen where the problem appears:
Code: Select all
// RESOURCE SCRIPT generated by "Pelles C for Windows, version 6.50".
#include <windows.h>
#include <commctrl.h>
#include <richedit.h>
LANGUAGE LANG_PORTUGUESE,SUBLANG_PORTUGUESE_BRAZILIAN
EXCLUIR BITMAP "res1.bmp"
GRAVAR BITMAP "res2.bmp"
SANGRIA BITMAP "res3.bmp"
SANGRIA1 BITMAP "res4.bmp"
SUPRIMENTO BITMAP "res5.bmp"
SUPRIMENTO1 BITMAP "res6.bmp"
VENDER BITMAP "res7.bmp"
VENDER1 BITMAP "res8.bmp"
CLOCK CURSOR "res1.cur"
I_AGUARDE ICON "res1.ico"
I_ARMARIO ICON "res2.ico"
I_IMPRESSORA ICON "res3.ico"
I_SENHA ICON "res4.ico"
DLG_CONFIG DIALOG DISCARDABLE 6, 15, 520, 327
STYLE WS_POPUP|DS_MODALFRAME|WS_CAPTION|WS_SYSMENU|WS_VISIBLE
CAPTION "Parametrização do Sistema"
FONT 8, "MS Sans Serif"
{
CONTROL "Mensagem do Cupom", 131, "Button", BS_GROUPBOX, 2, 204, 288, 96
CONTROL "Configuração Retaguarda", 114, "Button", BS_GROUPBOX|WS_GROUP, 292, 233, 226, 70, WS_EX_TRANSPARENT
CONTROL "", 110, "TFolderex", WS_GROUP|WS_TABSTOP, 2, 2, 516, 152
CONTROL "Balança Imprime Preço no Código de Barra EAN13", 901, "Button", BS_AUTOCHECKBOX, 6, 156, 252, 10
CONTROL "Solicitar Comissionamento após a venda", 902, "Button", BS_AUTOCHECKBOX, 266, 156, 238, 10
CONTROL "Imprimir Nome Usuário no Cupom", 903, "Button", BS_AUTOCHECKBOX, 6, 168, 252, 10
CONTROL "Bloquear Venda com Estoque Zerado ou Negativo", 904, "Button", BS_AUTOCHECKBOX, 266, 168, 238, 10
CONTROL "Selecionar Campo Cliente no Pagamento", 907, "Button", BS_AUTOCHECKBOX, 6, 180, 252, 10
CONTROL "Mostrar Quantidade Total na Venda", 905, "Button", BS_AUTOCHECKBOX, 266, 180, 238, 10
CONTROL "Somar a Posição de Estoque Vinda do Retaguarda", 910, "Button", BS_AUTOCHECKBOX, 6, 193, 285, 10
CONTROL "", 211, "Edit", ES_AUTOHSCROLL|WS_BORDER|WS_TABSTOP, 6, 217, 280, 14
CONTROL "", 212, "Edit", ES_AUTOHSCROLL|WS_BORDER|WS_TABSTOP, 6, 233, 280, 14
CONTROL "", 213, "Edit", ES_AUTOHSCROLL|WS_BORDER|WS_TABSTOP, 6, 249, 280, 14
CONTROL "", 214, "Edit", ES_AUTOHSCROLL|WS_BORDER|WS_TABSTOP, 6, 265, 280, 14
CONTROL "", 215, "Edit", ES_AUTOHSCROLL|WS_BORDER|WS_TABSTOP, 6, 281, 280, 14
CONTROL "Imprime Comp. Troca de Usuário", 906, "Button", BS_AUTOCHECKBOX, 294, 196, 219, 10
CONTROL "Permitir Alterar Parcelas e Datas", 908, "Button", BS_AUTOCHECKBOX, 294, 209, 219, 10
CONTROL "Pesquisa no Modo Supermercado por Descrição", 909, "Button", BS_AUTOCHECKBOX, 294, 221, 219, 10
CONTROL "Utiliza Retaguarda Padronizado", 801, "Button", BS_AUTORADIOBUTTON, 296, 245, 220, 10
CONTROL "Não Utiliza Retaguarda", 803, "Button", BS_AUTORADIOBUTTON, 296, 259, 220, 10
CONTROL "", 216, "Edit", ES_AUTOHSCROLL|WS_BORDER|WS_TABSTOP, 296, 287, 220, 13
CONTROL "Configurar &Impressora", 103, "Button", WS_TABSTOP, 2, 306, 120, 16
CONTROL "Configurar &Balança de Caixa", 104, "Button", WS_TABSTOP, 148, 306, 140, 16
CONTROL "&Aceitar", 101, "Button", WS_TABSTOP, 330, 306, 70, 16
CONTROL "&Cancelar", 102, "Button", WS_TABSTOP, 408, 306, 70, 16
CONTROL "Caminho do Servidor Retaguarda:", 38, "Static", WS_GROUP, 296, 275, 204, 10
}
BROWSE1 BITMAP "res9.bmp"
VS_VERSION_INFO VERSIONINFO
FILEVERSION 1,0,37,0
PRODUCTVERSION 1,0,37,0
FILEFLAGSMASK 0x3F
FILEFLAGS 0x0
FILEOS VOS__WINDOWS32
FILETYPE VFT_APP
FILESUBTYPE VFT2_UNKNOWN
{
BLOCK "StringFileInfo"
{
BLOCK "041604B0"
{
VALUE "Comments", "Sistema Emissor de Cupom Fiscal Homologado conforme CONVÊNIO ICMS 15/08\0"
VALUE "CompanyName", "SAALLC INFORMÁTICA\0"
VALUE "FileDescription", "Programa Aplicativo Fiscal (PAF/ECF - ER 01.07)\0"
VALUE "FileVersion", "1.37\0"
VALUE "InternalName", "SALC.EXE\0"
VALUE "LegalCopyright", "Sebastião Oliveira Pessoa - MicroInformática\0"
VALUE "LegalTrademarks", "SALC INFORMATICA\0"
VALUE "OriginalFilename", "SALC.EXE\0"
VALUE "PrivateBuild", "FIVEWIN/Xharbour\0"
VALUE "ProductName", "SALC - PAF-ECF - Programa Aplicativo Fiscal\0"
VALUE "ProductVersion", "1.37\0"
VALUE "SpecialBuild", "FIVEWIN/Xharbour\0"
}
}
BLOCK "VarFileInfo"
{
VALUE "Translation", 0x416, 0x4B0
}
}
1 MANIFEST "res1.xml"
BMPSALVAR BITMAP "res10.bmp"
BMPDESISTIR BITMAP "res11.bmp"
BMPEXCLUIR BITMAP "res12.bmp"
BMPSAIR1 BITMAP "res13.bmp"
BMPSAIR BITMAP "res14.bmp"
LEITURAX BITMAP "res15.bmp"
REINDEXAR BITMAP "res16.bmp"
TOOLS BITMAP "res17.bmp"
PROCURAR BITMAP "res18.bmp"
PASTAS BITMAP "res19.bmp"
BROWSE BITMAP "res20.bmp"
UNLOCK BITMAP "res21.bmp"
PIE BITMAP "res22.bmp"
BARS BITMAP "res23.bmp"
LINES BITMAP "res24.bmp"
POINT BITMAP "res25.bmp"
POINTS BITMAP "res26.bmp"
PRINTER BITMAP "res27.bmp"
XGRID BITMAP "res28.bmp"
YGRID BITMAP "res29.bmp"
3D BITMAP "res30.bmp"
I_SINTEGRA ICON "res5.ico"
SINTEGRA BITMAP "res31.bmp"
CALC BITMAP "res32.bmp"
BMPKEY BITMAP "res33.bmp"
BMPREDE BITMAP "res34.bmp"
AI_ECF ICON "res6.ico"
DIREITA BITMAP "res35.bmp"
ESQUERDA BITMAP "res36.bmp"
SPED ICON "res7.ico"
CONFIRMAR BITMAP "res37.bmp"
Thank you!
Contagem/Brazil
FWH/xharbour 15.12/PELLES C, MED, DBF
FWH/xharbour 15.12/PELLES C, MED, DBF
Re: Objects that disappear within the control Group
You can Download the Tool, to test if there is a difference in Group-painting.
Groups are painted on Dialogs and tested on TFolderEx.
All Brushes are supported : Color, Gradient, Bmp-brush and Image.
You can create PRG and EXE-files from Code or Resource.
A new Update will be released in a short Time.
http://forums.fivetechsupport.com/viewt ... =3&t=23744
Best Regards
Uwe
Groups are painted on Dialogs and tested on TFolderEx.
All Brushes are supported : Color, Gradient, Bmp-brush and Image.
You can create PRG and EXE-files from Code or Resource.
A new Update will be released in a short Time.
http://forums.fivetechsupport.com/viewt ... =3&t=23744
Best Regards
Uwe
Since 1995 ( the first release of FW 1.9 )
i work with FW.
If you have any questions about special functions, maybe i can help.
i work with FW.
If you have any questions about special functions, maybe i can help.
Re: Objects that disappear within the control Group
Good day.
Returning to the topic, since the problem still persists, with the help of a colleague he noted the following:
Depending on the configuration of Windows, in my case 64-BIT WINDOWS SEVEN, the controls within the control group disappear, see the following screens that illustrate the problem:
http://www.salc.com.br/atual/windowsconfigok.jpg
http://www.salc.com.br/atual/telasistemaok.jpg
http://www.salc.com.br/atual/windowsconfigfail.jpg
http://www.salc.com.br/atual/telasistemafail.jpg
I believe it is a clue to be found the reason for the problem.
Thank you.
Returning to the topic, since the problem still persists, with the help of a colleague he noted the following:
Depending on the configuration of Windows, in my case 64-BIT WINDOWS SEVEN, the controls within the control group disappear, see the following screens that illustrate the problem:
http://www.salc.com.br/atual/windowsconfigok.jpg
http://www.salc.com.br/atual/telasistemaok.jpg
http://www.salc.com.br/atual/windowsconfigfail.jpg
http://www.salc.com.br/atual/telasistemafail.jpg
I believe it is a clue to be found the reason for the problem.
Thank you.
Contagem/Brazil
FWH/xharbour 15.12/PELLES C, MED, DBF
FWH/xharbour 15.12/PELLES C, MED, DBF
- lucasdebeltran
- Posts: 1303
- Joined: Tue Jul 21, 2009 8:12 am
- Contact:
Re: Objects that disappear within the control Group
Hello,
With the bad config, does the problem happens always, or how often?.
Thanks.
I did also noticed this problem and I got reported too from my customers.
With the bad config, does the problem happens always, or how often?.
Thanks.
I did also noticed this problem and I got reported too from my customers.
Muchas gracias. Many thanks.
Un saludo, Best regards,
Harbour 3.2.0dev, Borland C++ 5.82 y FWH 13.06 [producción]
Implementando MSVC 2010, FWH64 y ADO.
Abandonando uso xHarbour y SQLRDD.
Un saludo, Best regards,
Harbour 3.2.0dev, Borland C++ 5.82 y FWH 13.06 [producción]
Implementando MSVC 2010, FWH64 y ADO.
Abandonando uso xHarbour y SQLRDD.
Re: Objects that disappear within the control Group
It always happens, just change the configuration as shown on the screen.
There is an intermittent problem.
thank you
There is an intermittent problem.
thank you
Contagem/Brazil
FWH/xharbour 15.12/PELLES C, MED, DBF
FWH/xharbour 15.12/PELLES C, MED, DBF
Re: Objects that disappear within the control Group
Up!
Thanks
Thanks
Contagem/Brazil
FWH/xharbour 15.12/PELLES C, MED, DBF
FWH/xharbour 15.12/PELLES C, MED, DBF
Re: Objects that disappear within the control Group
My customers also reported this (similar) problems. For me the solution was removing TRANSPARENT from Group, because I don't need TRANSPARENT in my app. But there is a problem. Maybe in combination with Checkboxes. If I disable a checkbox than a part of objects will disappear.lucasdebeltran wrote:I did also noticed this problem and I got reported too from my customers.
Best Regards,
Ruediger Alich
---
HMG 3.1.3 | FTDN/FWH 13.12 | Harbour 3.2 | BCC/MinGW | Windows XP/Vista/7/8/10 (32/64-Bit), Wine (Linux/Mac) - started 1999 with FW, 1989 with Clipper
Ruediger Alich
---
HMG 3.1.3 | FTDN/FWH 13.12 | Harbour 3.2 | BCC/MinGW | Windows XP/Vista/7/8/10 (32/64-Bit), Wine (Linux/Mac) - started 1999 with FW, 1989 with Clipper