Construir Harbour con BCC 7.1

User avatar
Vikthor.Thomas
Posts: 144
Joined: Thu Jan 02, 2014 1:49 pm

Construir Harbour con BCC 7.1

Post by Vikthor.Thomas »

Buen día
He bajado los fuentes de Harbour y también he tratado de realizar la compilación sin obtener éxito.
El resultado que obtengo es el siguiente

Code: Select all

C:\Harbour>win-make.exe clean 
! Building Harbour 3.2.0dev from source - http://harbour-project.org
! MAKE: win-make.exe 4.1 sh.exe clean  
! HB_HOST_PLAT: win (x86_64)  HB_SHELL: nt
! HB_PLATFORM: win (x86) 
! HB_COMPILER: bcc64 
! Component: 'zlib' found in C:/Harbour/src/3rd/zlib (local)
! Component: 'pcre' found in C:/Harbour/src/3rd/pcre (local)
! Component: 'gpm' not supported on win platform
! Component: 'slang' not found. Configure with HB_WITH_SLANG.
! Component: 'curses' not found. Configure with HB_WITH_CURSES.
! Component: 'x11' not found. Configure with HB_WITH_X11.
! Component: 'wattcp/watt-32' not supported on win platform
! 'hbdossrl' library skipped (platform or compiler not supported)
! 'gtcrs' library skipped (component not found)
! 'gtdos' library skipped (platform not supported)
! 'gtos2' library skipped (platform not supported)
! 'gtsln' library skipped (component not found)
! 'gttrm' library skipped (platform or compiler not supported)
! 'gtxwc' library skipped (component not found)
! Warning: hbmk2 not found, contrib/make.hb skipped.
! Warning: hbmk2 not found, config/postinst.hb skipped.
 
Los valores que tienen HB_PLATFORM y HB_COMPILER son
@set HB_PLATFORM=win
@set HB_COMPILER=bcc64

Estoy usando Win10

Saludos
User avatar
Antonio Linares
Site Admin
Posts: 37481
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain
Contact:

Re: Construir Harbour con BCC 7.1

Post by Antonio Linares »

Despues de win-make.exe clean tienes que llamar a win-make.exe (sin el clean)
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Vikthor.Thomas
Posts: 144
Joined: Thu Jan 02, 2014 1:49 pm

Re: Construir Harbour con BCC 7.1

Post by Vikthor.Thomas »

Antonio, gracias por responder.
Ahora obtengo el siguiente aviso

Code: Select all

! Building Harbour 3.2.0dev from source - http://harbour-project.org
! MAKE: win-make.exe 4.1 sh.exe   
! HB_HOST_PLAT: win (x86_64)  HB_SHELL: nt
! HB_PLATFORM: win (x86) 
! HB_COMPILER: bcc64 
! Component: 'zlib' found in C:/Harbour/src/3rd/zlib (local)
! Component: 'pcre' found in C:/Harbour/src/3rd/pcre (local)
! Component: 'gpm' not supported on win platform
! Component: 'slang' not found. Configure with HB_WITH_SLANG.
! Component: 'curses' not found. Configure with HB_WITH_CURSES.
! Component: 'x11' not found. Configure with HB_WITH_X11.
! Component: 'wattcp/watt-32' not supported on win platform
win-make.exe[1]: Nothing to be done for 'all'.
win-make.exe[1]: Nothing to be done for 'all'.
! 'hbdossrl' library skipped (platform or compiler not supported)
bcc64.exe   -I. -I../../../../../../include -q -tWM -CP437 -w-sig- -w-aus- -w-ccc- -w-csu- -w-par- -w-rch- -w-ucp- -w-use- -w-prc- -w-pia- -d -O2 -OS -Ov -Oc  -DUNICODE -IC:/Harbour/src/3rd/zlib -DPNG_NO_STDIO  -opng.o  -c ../../../png.c
../../../../../../config/rules.mk:84: recipe for target 'png.o' failed
../../../config/lib.mk:68: recipe for target 'descend' failed
../../config/dir.mk:71: recipe for target 'png' failed
../config/dir.mk:71: recipe for target '3rd' failed
config/dir.mk:71: recipe for target 'src' failed
 
Al final aparece lo siguiente

Code: Select all


process_begin: CreateProcess(NULL, bcc64.exe -I. -I../../../../../../include -q -tWM -CP437 -w-sig- -w-aus- -w-ccc- -w-csu- -w-par- -w-rch- -w-ucp- -w-use- -w-prc- -w-pia- -d -O2 -OS -Ov -Oc -DUNICODE -IC:/Harbour/src/3rd/zlib -DPNG_NO_STDIO -opng.o -c ../../../png.c, ...) failed.
make (e=2): El sistema no puede encontrar el archivo especificado.
win-make.exe[4]: *** [png.o] Error 2
win-make.exe[3]: *** [descend] Error 2
win-make.exe[2]: *** [png] Error 2
win-make.exe[1]: *** [3rd] Error 2
win-make.exe: *** [src] Error 2

 
User avatar
compubrion
Posts: 130
Joined: Thu Mar 08, 2007 6:12 pm
Location: Miranda - Venezuela
Contact:

Re: Construir Harbour con BCC 7.1

Post by compubrion »

Hola Victor, saludos
Remplaza la lib unicows.a de borland por la que trae harbour en lib\3rd\win\bcc\unicows.lib
Harbour / Bcc / MinGW / Fwh 13.9
User avatar
Vikthor.Thomas
Posts: 144
Joined: Thu Jan 02, 2014 1:49 pm

Re: Construir Harbour con BCC 7.1

Post by Vikthor.Thomas »

compubrion wrote:Hola Victor, saludos
Remplaza la lib unicows.a de borland por la que trae harbour en lib\3rd\win\bcc\unicows.lib
Gracias por la respuesta.
Ya hice el cambio y el resultado fue el mismo :-(
User avatar
Antonio Linares
Site Admin
Posts: 37481
Joined: Thu Oct 06, 2005 5:47 pm
Location: Spain
Contact:

Re: Construir Harbour con BCC 7.1

Post by Antonio Linares »

No encuentra bcc64.exe

Haz esto antes de llamar a win-make

set path=c:\bcc7164\bin

usa tu path
regards, saludos

Antonio Linares
www.fivetechsoft.com
User avatar
Vikthor.Thomas
Posts: 144
Joined: Thu Jan 02, 2014 1:49 pm

Re: Construir Harbour con BCC 7.1

Post by Vikthor.Thomas »

Antonio Linares wrote:No encuentra bcc64.exe

Haz esto antes de llamar a win-make

set path=c:\bcc7164\bin

usa tu path
En que parte se configuran los los flags ?

Code: Select all




! 'hbdossrl' library skipped (platform or compiler not supported)
bcc64.exe   -I. -I../../../../../../include -q -tWM -CP437 -w-sig- -w-aus- -w-ccc- -w-csu- -w-par- -w-rch- -w-ucp- -w-use- -w-prc- -w-pia- -d -O2 -OS -Ov -Oc  -DUNICODE -IC:/Harbour/src/3rd/zlib -DPNG_NO_STDIO  -opng.o  -c ../../../png.c
bcc64.exe: warning: argument unused during compilation: '-CP437'
bcc64.exe: warning: argument unused during compilation: '-w-sig-'
bcc64.exe: warning: argument unused during compilation: '-w-aus-'
bcc64.exe: warning: argument unused during compilation: '-w-ccc-'
bcc64.exe: warning: argument unused during compilation: '-w-csu-'
bcc64.exe: warning: argument unused during compilation: '-w-par-'
bcc64.exe: warning: argument unused during compilation: '-w-rch-'
bcc64.exe: warning: argument unused during compilation: '-w-ucp-'
bcc64.exe: warning: argument unused during compilation: '-w-use-'
bcc64.exe: warning: argument unused during compilation: '-w-prc-'
bcc64.exe: warning: argument unused during compilation: '-w-pia-'
bcc64.exe: warning: argument unused during compilation: '-d'
../../../png.c:
error: invalid integral value 'c' in '-Oc'
error: invalid integral value 'c' in '-Oc'
../../../../../../config/rules.mk:84: recipe for target 'png.o' failed
win-make.exe[4]: *** [png.o] Error 1
../../../config/lib.mk:68: recipe for target 'descend' failed
win-make.exe[3]: *** [descend] Error 2
../../config/dir.mk:68: recipe for target 'png.inst' failed
win-make.exe[2]: *** [png.inst] Error 2
../config/dir.mk:68: recipe for target '3rd.inst' failed
win-make.exe[1]: *** [3rd.inst] Error 2
config/dir.mk:68: recipe for target 'src.inst' failed
win-make.exe: *** [src.inst] Error 2
 
User avatar
carlos vargas
Posts: 1421
Joined: Tue Oct 11, 2005 5:01 pm
Location: Nicaragua

Re: Construir Harbour con BCC 7.1

Post by carlos vargas »

ok, para poder construir bcc64 bit, con harbour no muy facil que digamos.
se deben realizar cambios en ciertos archivos de encabezado, configuracion, y prg. de harbour:

1.- modificar "harbour\include\hbregex.h"

Code: Select all

#if defined( _HB_REGEX_INTERNAL_ )

#if __BORLANDC__ >= 0x710
   #undef HB_HAS_PCRE
#endif

#ifdef defined( HB_HAS_PCRE )
#  include <pcre.h>
#  undef HB_POSIX_REGEX
#elif defined( HB_OS_UNIX )
#  include <sys/types.h>
#  include <regex.h>
#  define HB_POSIX_REGEX
#elif defined( __BORLANDC__ )
#  include <pcreposi.h>
#  define HB_POSIX_REGEX
#else
#  error pcre component required, but not available
#endif
 
Salu2
Carlos Vargas
Desde Managua, Nicaragua (CA)
User avatar
carlos vargas
Posts: 1421
Joined: Tue Oct 11, 2005 5:01 pm
Location: Nicaragua

Re: Construir Harbour con BCC 7.1

Post by carlos vargas »

harbour\config\win\global.mk

Code: Select all

all : first

RES_EXT := .res
BIN_EXT := .exe
DYN_EXT := .dll

HB_CFLAGS += -DUNICODE

HB_GT_LIBS += gtwvt gtgui gtwin

# kernel32: needed by some compilers (pocc/watcom)
# user32: *Clipboard*(), GetKeyState(), GetKeyboardState(), SetKeyboardState(), gtwvt stuff
# ws2_32/wsock32: hbsocket
# ws2_32: WSAIoctl()
# iphlpapi: hbsocket->GetAdaptersInfo()
# advapi32: GetUserName()
# gdi32: gtwvt

# unicows lib must come after user libs and before Windows system libs
ifneq ($(wildcard $(TOP)$(ROOT)lib/3rd/$(HB_PLATFORM)/$(HB_COMPILER)),)
   3RDLIB_DIR := $(TOP)$(ROOT)lib/3rd/$(HB_PLATFORM)/$(HB_COMPILER)
   3RDLIBS := unicows
endif

#KDS
ifeq ($(HB_COMPILER),bcc64)
   SYSLIBS += d:\compiler\bcc\lib\win64\psdk\kernel32 d:\compiler\bcc\lib\win64\psdk\user32 d:\compiler\bcc\lib\win64\psdk\ws2_32 d:\compiler\bcc\lib\win64\psdk\iphlpapi d:\compiler\bcc\lib\win64\psdk\advapi32 d:\compiler\bcc\lib\win64\psdk\gdi32
else
   SYSLIBS += kernel32 user32 ws2_32 iphlpapi advapi32 gdi32
endif

SYSLIBS += kernel32 user32 ws2_32 iphlpapi advapi32 gdi32 winmm
 
Salu2
Carlos Vargas
Desde Managua, Nicaragua (CA)
User avatar
carlos vargas
Posts: 1421
Joined: Tue Oct 11, 2005 5:01 pm
Location: Nicaragua

Re: Construir Harbour con BCC 7.1

Post by carlos vargas »

harbour\config\win\bcc.mk

Code: Select all

# GNU Make file for Borland/CodeGear/Embarcadero C/C++ 32-bit (4.x-)

ifeq ($(HB_COMPILER),bcc64)
   OBJ_EXT := .o
   LIB_PREF :=
   LIB_EXT := .a
else
   OBJ_EXT := .obj
   LIB_PREF :=
   LIB_EXT := .lib
endif

HB_DYN_COPT := -DHB_DYNLIB

ifeq ($(HB_COMPILER),bcc64)
   CC := bcc64.exe
else
   CC := bcc32.exe
endif
CC_IN := -c
CC_OUT := -o

CFLAGS += -I. -I$(HB_HOST_INC)

#KDS CFLAGS += -q -tWM -CP437
CFLAGS += -q -tWM

ifeq ($(HB_BUILD_WARN),no)
   #CFLAGS += -w-sig- -w-aus- -w-ccc- -w-csu- -w-par- -w-rch- -w-ucp- -w-use- -w-prc- -w-pia-
else
   CFLAGS += -w -Q -w-sig-
endif

ifneq ($(HB_BUILD_OPTIM),no)
   ifeq ($(HB_COMPILER),bcc64)
      #KDS CFLAGS += -d -O2 -OS -Ov -Oc
      CFLAGS += -d -O2 -Id:\compiler\bcc\include\windows\crtl -Id:\compiler\bcc\include\windows\sdk
   else
      # for some reason -6 generates the exact same code as -4 with both 5.5 and 5.8.
      # -5 seems to be significantly slower than both. [vszakats]
      CFLAGS += -d -O2 -OS -Ov -Oc -Oi -6
   endif
endif

ifeq ($(HB_BUILD_MODE),cpp)
   CFLAGS += -P
endif

ifeq ($(HB_BUILD_DEBUG),yes)
   ifeq ($(HB_COMPILER),bcc64)
      CFLAGS += -g
   else
      CFLAGS += -v -y
   endif
endif

ifneq ($(HB_HOST_PLAT_UNIX),)
   BACKSLASH := $(subst /,\,\\)
else
   BACKSLASH := $(subst /,\,\)
endif

ifeq ($(HB_SHELL),sh)
   ECHOBACKSLASH := $(BACKSLASH)$(BACKSLASH)
else
   ECHOBACKSLASH := $(BACKSLASH)
endif

# Hack to autoconfig bcc, and not require properly set .cfg files in its bin dir.
# It only works if we know compiler location.
ifneq ($(HB_COMP_PATH_PUB),)
   HB_CFLAGS += $(subst /,$(BACKSLASH),-I"$(HB_COMP_PATH_PUB)../Include")
   RCFLAGS   += $(subst /,$(BACKSLASH),-I"$(HB_COMP_PATH_PUB)../Include")
   ifneq ($(wildcard $(HB_COMP_PATH_PUB)../Include/windows/crtl),)
      HB_CFLAGS += $(subst /,$(BACKSLASH),-I"$(HB_COMP_PATH_PUB)../Include/windows/crtl")
      RCFLAGS   += $(subst /,$(BACKSLASH),-I"$(HB_COMP_PATH_PUB)../Include/windows/crtl")
   endif
   ifneq ($(wildcard $(HB_COMP_PATH_PUB)../Include/windows/sdk),)
      HB_CFLAGS += $(subst /,$(BACKSLASH),-I"$(HB_COMP_PATH_PUB)../Include/windows/sdk")
      RCFLAGS   += $(subst /,$(BACKSLASH),-I"$(HB_COMP_PATH_PUB)../Include/windows/sdk")
   endif
   ifeq ($(HB_COMPILER),bcc64)
      LDFLAGS   += $(subst /,$(BACKSLASH),-L"$(HB_COMP_PATH_PUB)../Lib" -L"$(HB_COMP_PATH_PUB)../Lib/Win64/PSDK")
      DFLAGS    += $(subst /,$(BACKSLASH),-L"$(HB_COMP_PATH_PUB)../Lib" -L"$(HB_COMP_PATH_PUB)../Lib/Win64/PSDK")
   else
      LDFLAGS   += $(subst /,$(BACKSLASH),-L"$(HB_COMP_PATH_PUB)../Lib" -L"$(HB_COMP_PATH_PUB)../Lib/PSDK")
      DFLAGS    += $(subst /,$(BACKSLASH),-L"$(HB_COMP_PATH_PUB)../Lib" -L"$(HB_COMP_PATH_PUB)../Lib/PSDK")
   endif
endif

RC := brcc32.exe
RC_OUT := -fo
ifeq ($(HB_COMPILER),bcc64)
   RCFLAGS += -I. -I$(HB_HOST_INC) -Id:\compiler\bcc\include\windows\sdk
else
   RCFLAGS += -I. -I$(HB_HOST_INC)
endif

ifeq ($(HB_COMPILER),bcc64)
   LD := ilink64.exe
else
   LD := ilink32.exe
endif

LIBPATHS := $(foreach dir,$(LIB_DIR) $(3RDLIB_DIR),$(subst /,$(BACKSLASH),-L"$(dir)"))
LDFLAGS += $(LIBPATHS) -Gn -Tpe

ifeq ($(HB_COMPILER),bcc64)
   LD_RULE = $(LD) $(LDFLAGS) $(HB_LDFLAGS) $(HB_USER_LDFLAGS) d:\compiler\bcc\lib\win64\c0x64.o $(filter-out %$(RES_EXT),$(^F)), "$(subst /,$(BACKSLASH),$(BIN_DIR)/$@)", nul, $(LDLIBS) d:\compiler\bcc\lib\win64\cw64mt d:\compiler\bcc\lib\win64\import64,, $(filter %$(RES_EXT),$(^F)) $(LDSTRIP)
else
   LD_RULE = $(LD) $(LDFLAGS) $(HB_LDFLAGS) $(HB_USER_LDFLAGS) c0x32.obj $(filter-out %$(RES_EXT),$(^F)), "$(subst /,$(BACKSLASH),$(BIN_DIR)/$@)", nul, $(LDLIBS) cw32mt import32,, $(filter %$(RES_EXT),$(^F)) $(LDSTRIP)
endif

LDLIBS := $(strip $(HB_USER_LIBS) $(LIBS) $(3RDLIBS) $(SYSLIBS))

ifeq ($(HB_COMPILER),bcc64)
   AR := tlib64.exe
else
   AR := tlib.exe
endif
ARFLAGS += /P128
AR_RULE = $(AR) $(ARFLAGS) $(HB_AFLAGS) $(HB_USER_AFLAGS) "$(subst /,$(BACKSLASH),$(LIB_DIR)/$@)" $(foreach file,$(?F),-+$(file))

ifneq ($(HB_SHELL),sh)
   ifeq ($(HB_SHELL_XP),)

      ifeq ($(HB_SHELL),nt)
         LINECONT := ^&
      else
         LINECONT := &
      endif

      # NOTE: Command-line limit length defeating methods found below
      #       are only needed to support pre-Windows XP systems, where
      #       limit is 2047 chars. [vszakats]

      # NOTE: The empty line directly before 'endef' HAVE TO exist!
      define library_object
         @$(ECHO) $(ECHOQUOTE)-+$(subst /,$(ECHOBACKSLASH),$(file)) $(LINECONT)$(ECHOQUOTE) >> __lib__.tmp

      endef

      define create_library
         $(if $(wildcard __lib__.tmp),@$(RM) __lib__.tmp,)
         $(foreach file,$(?F),$(library_object))
         @$(ECHO) $(ECHOQUOTE)-+$(ECHOQUOTE)>> __lib__.tmp
         $(AR) $(ARFLAGS) $(HB_AFLAGS) $(HB_USER_AFLAGS) "$(subst /,$(BACKSLASH),$(LIB_DIR)/$@)" @__lib__.tmp
      endef

      AR_RULE = $(create_library)

   endif
endif

ifeq ($(HB_COMPILER),bcc64)
   DY := ilink64.exe
else
   DY := ilink32.exe
endif
DFLAGS += -q -Gn -C -aa -Tpd -Gi -x $(LIBPATHS)
DY_OUT :=
# NOTE: .lib extension not added to keep line short enough to work on Win9x/ME
ifeq ($(HB_COMPILER),bcc64)
   DLIBS := $(HB_USER_LIBS) $(LIBS) $(3RDLIBS) $(SYSLIBS) d:\compiler\bcc\lib\win64\cw64mt d:\compiler\bcc\lib\win64\import64
else
   DLIBS := $(HB_USER_LIBS) $(LIBS) $(3RDLIBS) $(SYSLIBS) cw32mt import32
endif

# NOTE: The empty line directly before 'endef' HAVE TO exist!
define dynlib_object
   @$(ECHO) $(ECHOQUOTE)$(subst /,$(ECHOBACKSLASH),$(file)) +$(ECHOQUOTE) >> __dyn__.tmp

endef

#KDS 
ifeq ($(HB_COMPILER),bcc64)
   define create_dynlib
      $(if $(wildcard __dyn__.tmp),@$(RM) __dyn__.tmp,)
      $(foreach file,$^,$(dynlib_object))
      @$(ECHO) $(ECHOQUOTE), $(subst /,$(ECHOBACKSLASH),$(DYN_DIR)/$@),, $(subst /,$(ECHOBACKSLASH),$(DLIBS))$(ECHOQUOTE) >> __dyn__.tmp
      $(DY) $(DFLAGS) $(HB_USER_DFLAGS) d:\compiler\bcc\lib\win64\c0d64.o @__dyn__.tmp
      @$(CP) $(subst /,$(DIRSEP),$(DYN_DIR)/$(basename $@)$(LIB_EXT)) $(subst /,$(DIRSEP),$(IMP_FILE))
      @$(RM) $(subst /,$(DIRSEP),$(DYN_DIR)/$(basename $@)$(LIB_EXT))
   endef
else
   define create_dynlib
      $(if $(wildcard __dyn__.tmp),@$(RM) __dyn__.tmp,)
      $(foreach file,$^,$(dynlib_object))
      @$(ECHO) $(ECHOQUOTE), $(subst /,$(ECHOBACKSLASH),$(DYN_DIR)/$@),, $(subst /,$(ECHOBACKSLASH),$(DLIBS))$(ECHOQUOTE) >> __dyn__.tmp
      $(DY) $(DFLAGS) $(HB_USER_DFLAGS) c0d32.obj @__dyn__.tmp
      @$(CP) $(subst /,$(DIRSEP),$(DYN_DIR)/$(basename $@)$(LIB_EXT)) $(subst /,$(DIRSEP),$(IMP_FILE))
      @$(RM) $(subst /,$(DIRSEP),$(DYN_DIR)/$(basename $@)$(LIB_EXT))
   endef
endif

DY_RULE = $(create_dynlib)

include $(TOP)$(ROOT)config/rules.mk 
 
Salu2
Carlos Vargas
Desde Managua, Nicaragua (CA)
User avatar
carlos vargas
Posts: 1421
Joined: Tue Oct 11, 2005 5:01 pm
Location: Nicaragua

Re: Construir Harbour con BCC 7.1

Post by carlos vargas »

debo aclarar que yo tengo el compilador borland en la siguiente ruta
d:\compiler\bcc
y que ademas en la misma carpeta tengo los tres compiladores de borland (bcc, bcc32c, bcc64)
lo unico diferente es que
en la carpeta include hay una carpeta adicional llamada dinkumware64
\include\dinkumware64
y que en la carpeta lib, tengo tres subcarpetas
\lib\win32
\lib\win32c
\lib\win64
Salu2
Carlos Vargas
Desde Managua, Nicaragua (CA)
User avatar
carlos vargas
Posts: 1421
Joined: Tue Oct 11, 2005 5:01 pm
Location: Nicaragua

Re: Construir Harbour con BCC 7.1

Post by carlos vargas »

otro punto es que en la version que uso, bcc730, parece que el parametro -d para el compilador bcc64 ya no funciona.
por lo que el cambio en \harbour\config\win\bcc.mk

Code: Select all

      #KDS CFLAGS += -d -O2 -OS -Ov -Oc
      CFLAGS += -d -O2 -Id:\compiler\bcc\include\windows\crtl -Id:\compiler\bcc\include\windows\sdk
 
deberia quedar asi

Code: Select all

      #KDS CFLAGS += -d -O2 -OS -Ov -Oc
      CFLAGS += -O2 -Id:\compiler\bcc\include\windows\crtl -Id:\compiler\bcc\include\windows\sdk
 
Salu2
Carlos Vargas
Desde Managua, Nicaragua (CA)
User avatar
carlos vargas
Posts: 1421
Joined: Tue Oct 11, 2005 5:01 pm
Location: Nicaragua

Re: Construir Harbour con BCC 7.1

Post by carlos vargas »

Salu2
Carlos Vargas
Desde Managua, Nicaragua (CA)
User avatar
carlos vargas
Posts: 1421
Joined: Tue Oct 11, 2005 5:01 pm
Location: Nicaragua

Re: Construir Harbour con BCC 7.1

Post by carlos vargas »

aca dejo los tres archivos con _ necesarios.

http://castillolawyers.no-ip.info/owncl ... peMvZONGcl
Last edited by carlos vargas on Tue Apr 18, 2017 10:08 pm, edited 1 time in total.
Salu2
Carlos Vargas
Desde Managua, Nicaragua (CA)
User avatar
carlos vargas
Posts: 1421
Joined: Tue Oct 11, 2005 5:01 pm
Location: Nicaragua

Re: Construir Harbour con BCC 7.1

Post by carlos vargas »

cabe aclarar, que el compilador harboury las librerias bases si son construidas, pero no asi el hbmk2.exe, lo que provoca que cuando va ha construir las librerias de la carpeta "contrib" de un error, ya que ahi se usa hbmk2 como gestor de proyectos para construir cada uno de las contribuciones.

pero si no modifico hbregex.h, el hbmk2.exe es construido, pero no es posible que se ejecute correctamente ya que da error de tipo overflow o algo por el estilo, no recuerdo.

si alguien puede aportar _ necesarios para reparar esto, pues muy agradecido.
Salu2
Carlos Vargas
Desde Managua, Nicaragua (CA)
Post Reply