New FWH 19.09
Posted: Sun Oct 13, 2019 11:14 am
I noticed a problem with xBrowse
It seems celledit on doubleclick -> return doesn't save the values.
regards
Uwe
FiveTech Software tech support forums
www.FiveTechSoft.com
https://fivetechsoft.com/forums/
New FWH 19.09
Page 1 of 3
Re: New FWH 19.09
Posted: Sun Oct 13, 2019 5:13 pm
Dear Antonio,
I noticed a problem with xBrowse
It seems celledit on doubleclick -> return doesn't save the values.
regards
Uwe
I noticed a problem with xBrowse
It seems celledit on doubleclick -> return doesn't save the values.
regards
Uwe
Re: New FWH 19.09
Posted: Mon Oct 14, 2019 4:21 am
Dear Antonio,
May I know this HARUPDF NEW feature is also using EASYREPORT when we generate PDF directly ?
May I know this HARUPDF NEW feature is also using EASYREPORT when we generate PDF directly ?
* HARUPDF:
- New class FWPdf (derived from class TPdf contributed by Mr. Carlos Mora
and improved and adapted for FWH.).
\fwh\source\classes\fwpdf.prg and tpdf.prg
Usage:
oPdf := FWPdf():New( cPdfFileName )
// write text, images, barcodes and other graphics with the same methods
// like Priner class.
oPdf:End() // saves the pdffile and ends the object
- In normal course, it is not necessary to instantiate the object
separately and instead we can use PRINT/ENDPRINT commands to write
portable code.
At present, the command:
PRINT oPrn [PREVIEW] FILE "filename.pdf"
// code
ENDPRINT
will save the printed matter to filename.pdf and display if the
clause PREVIEW is used.
This behaviour will continue.
If TPrinter():lUseHaruPDF is set to .T., and linked with harupdf
by REQUEST FWHARU, the above print command will generate the pdf file
using harupdf.
Re: New FWH 19.09
Posted: Mon Oct 14, 2019 10:14 pm
Dear Uwe,
We are reviewing it, many thanks for your feedbackukoenig wrote:Dear Antonio,
I noticed a problem with xBrowse
It seems celledit on doubleclick -> return doesn't save the values.
regards
Uwe
Re: New FWH 19.09
Posted: Tue Oct 15, 2019 4:24 am
We tested here and found it is working fine.ukoenig wrote:Dear Antonio,
I noticed a problem with xBrowse
It seems celledit on doubleclick -> return doesn't save the values.
regards
Uwe
This is a small sample
Code: Select all
#include "fivewin.ch"
REQUEST DBFCDX
function Main()
RDDSETDEFAULT( "DBFCDX" )
XBROWSER "STATES.DBF" FASTEDIT
return nil
If you are having any problem, please provide a small self contained sample to reproduce the problem.
Re: New FWH 19.09
Posted: Tue Oct 15, 2019 4:26 am
Mr. Shridhar
It is not yet implemented for EasyReport.
We plan to implement it in the next version.
It is not yet implemented for EasyReport.
We plan to implement it in the next version.
Re: New FWH 19.09
Posted: Tue Oct 15, 2019 8:39 am
Hello,
Can you please look at this?
https://forums.fivetechsupport.com/view ... =3&t=37792
Thank you
Can you please look at this?
https://forums.fivetechsupport.com/view ... =3&t=37792
Thank you
Re: New FWH 19.09
Posted: Tue Oct 15, 2019 2:37 pm
The problem doesn't belong to FASTEDIT
to get it working (EDIT_GET) I added the following line
:aCols:bOnPostEdit := { | o, v | SAVE_VALUE1( oProj1, v, nColNo ), oProj1:Save() }
the value is saved to the DBF after celledit -> return
I didn't need this with FWH_19.06 but maybe the dialog / browser-structure is a bit complicated
regards
Uwe
to get it working (EDIT_GET) I added the following line
:aCols:bOnPostEdit := { | o, v | SAVE_VALUE1( oProj1, v, nColNo ), oProj1:Save() }
the value is saved to the DBF after celledit -> return
I didn't need this with FWH_19.06 but maybe the dialog / browser-structure is a bit complicated
regards
Uwe
Re: New FWH 19.09
Posted: Tue Oct 15, 2019 3:42 pm
Nothing is complicated. Fastedit or not the behaviour is the same.
By writing your own bOnPostEdit, you are complicating your program.
Keep your program simple and everything works fine.
Please post a small sample and we suggest the recommended way.
By writing your own bOnPostEdit, you are complicating your program.
Keep your program simple and everything works fine.
Please post a small sample and we suggest the recommended way.
Re: New FWH 19.09
Posted: Tue Oct 15, 2019 5:15 pm
This is a full working section ( exe and prg ) for the FASTEDIT-test
The same is done with 3 connected DBF's
DOWNLOAD
http://www.pflegeplus.com/DOWNLOADS/Install4.zip
regards
Uwe
The same is done with 3 connected DBF's
DOWNLOAD
http://www.pflegeplus.com/DOWNLOADS/Install4.zip
regards
Uwe
Re: New FWH 19.09
Posted: Wed Oct 16, 2019 7:48 am
oPrint:roundbox(…) is not compatible to older FWH. The rectangle are turned 90 degrees and the pen is bigger!
Re: New FWH 19.09
Posted: Wed Oct 16, 2019 8:22 am
We will check this.
Re: New FWH 19.09
Posted: Wed Oct 16, 2019 8:39 am
Thanks! The pen is also in oPrint:box(...) bigger as before. In my case the pens are from type "object"
Re: New FWH 19.09
Posted: Thu Oct 17, 2019 8:25 am
For a better understanding.
The new test includes 2 compiled versions using FWH 19.06 and FWH 19.09
the difference :
DOWNLOAD
http://www.pflegeplus.com/DOWNLOADS/Install5.zip
regards
Uwe
The new test includes 2 compiled versions using FWH 19.06 and FWH 19.09
the difference :
Code: Select all
I := 4
FOR I := 4 to len( oBrw:aCols )
oCol := oBrw:aCols[ I ]
oCol:nEditType := EDIT_GET
// ------- only FWh 19.09 ----------
// oCol:bOnPostEdit := {|o, v, n| IIF( n != VK_ESCAPE, ;
// oProject:FieldPut( o:nCreationOrder, v ), ), ;
// oProject:Save(), oBrw:RefreshCurrent() }
// ------- only FWh 19.09 ----------
NEXT
http://www.pflegeplus.com/DOWNLOADS/Install5.zip
regards
Uwe
Re: New FWH 19.09
Posted: Thu Oct 17, 2019 10:18 am
Probaste con :
Saludos.
Code: Select all
:bOnPostEdit:= { | oCol, xVal, nKey | If( nKey == VK_RETURN, oCol:value:= xVal,) }