Page 1 of 1
calculate days
Posted: Mon Jan 07, 2019 12:43 pm
by Silvio.Falconi
I have a dbf where I save some periods, each period have a different price list
I must calculate numbers of days totals and for each period
Now there are 4 periods but can be more periods
I have two date: dDateFrom and DateTO and I must check if this interval ( dDateFrom and DateTO ) is on each period and calculate the number of days
How I can resolve ?
I explain you
I have to calculate how many days there are compared to the period table shown above
that is, for example:
if I have
dDateFrom 07.07.2018
DateTO 14.08.2018
I would have 39 days of which
low 0 days first record on table
low 0 days second record on table
Average 19 days 3th record on table
high 20 days 4th record on table
I tried but not run
Code: Select all
Function Test()
Local aListini:= {}
Local nYear :=year(date())
SET DATE ITALIAN
SET DATE FORMAT "dd-mm-yyyy"
USE LISTINI ALIAS LI
DO While !LI->(eof())
AaDd(aListini,{ (LI->CHECK_IN),(LI->CHECK_OUT),LI->GUEST })
LI->(dbskip())
ENDDO
XBROWSER aListini
dDateFrom:= Ctod( "7/07/2018")
dDateTo := Ctod("14/08/2018")
Calcolo_Giorni(dDateFrom,dDateTo,aListini)
RETURN NIL
Function Calcolo_Giorni(dDateFrom,dDateTo,aListini)
Local n
Local aDays:= array(len(alistini))
For n= 1 to Len(alistini)
IF dDateFrom >= cTOD(aListini[n][1] ) .and. dDateTo <= cTOD(aListini[n][2] )
adays[n] :=1 + ( dDateTo - dDateFrom )
endif
Next
xbrowser adays
return nil
Re: calculate days
Posted: Mon Jan 07, 2019 4:53 pm
by alerchster
Code: Select all
#include "fivewin.ch"
Function Test()
Local aListini := {}
Local nYear :=year(date())
Local dDateFrom, dDateTo
SET DATE ITALIAN
SET DATE FORMAT "dd-mm-yyyy"
USE LISTINI ALIAS LI
DO While !LI->(eof())
AaDd(aListini,{ cTod(LI->CHECK_IN),cTod(LI->CHECK_OUT),LI->GUEST,0 })
LI->(dbskip())
ENDDO
XBROWSER aListini
dDateFrom:= Ctod( "7/07/2018")
dDateTo := Ctod("14/08/2018")
Calcolo_Giorni(dDateFrom,dDateTo,aListini)
RETURN NIL
Function Calcolo_Giorni(dDateFrom,dDateTo,aListini)
Local d, n
For d = dDateFrom to dDateTo
For n=1 to len(aListini)
IF d >= aListini[n][1] .and. d <= aListini[n][2]
alistini[n][4] += 1
endif
Next
Next
xbrowser alistini
return nil
Re: calculate days
Posted: Tue Jan 08, 2019 9:07 am
by Silvio.Falconi
cmq thanks
I saw now that maybe the reasoning is wrong because each price list must have n example periods:
Price list 1 has the periods displayed
Price list 2 has other periods
so I still do not know how to do the procedure
Re: calculate days
Posted: Tue Jan 08, 2019 4:13 pm
by alerchster
Code: Select all
#include "fivewin.ch"
Function Test()
Local aListini := {}
Local nYear :=year(date())
Local dDateFrom, dDateTo, cPriceList
Create_Testfile()
SET DATE ITALIAN
SET DATE FORMAT "dd-mm-yyyy"
USE LISTINI ALIAS LI
DO While !LI->(eof())
AaDd(aListini,{ cTod(LI->CHECK_IN),cTod(LI->CHECK_OUT),LI->GUEST,LI->PRICE_LIST,0 })
LI->(dbskip())
ENDDO
XBROWSER aListini
dDateFrom:= Ctod( "7/07/2018")
dDateTo := Ctod("14/08/2018")
cPriceList:="PL1"
Calcolo_Giorni(dDateFrom,dDateTo,aListini,cPriceList)
dDateFrom:= Ctod( "07/07/2018")
dDateTo := Ctod("20/08/2018")
cPriceList:="PL2"
Calcolo_Giorni(dDateFrom,dDateTo,aListini,cPriceList)
RETURN NIL
Function Calcolo_Giorni(dDateFrom,dDateTo,aListini, cPrice_List)
Local d, n
//reset days
For n=1 to len(aListini)
aListIni[n][5]=0
next
For d = dDateFrom to dDateTo
For n=1 to len(aListini)
IF aListini[n][4]=cPrice_List .and. d >= aListini[n][1] .and. d <= aListini[n][2]
alistini[n][5] += 1
endif
Next
Next
// show result in col 5
xbrowser alistini
return nil
function Create_Testfile()
local aFields := { { "CHECK_IN", "C", 10, 0 },;
{ "CHECK_OUT", "C", 10, 0 },;
{ "GUEST", "C", 10, 0 },;
{ "PRICE_LIST", "C", 10, 0 } }
REQUEST DBFCDX
DbCreate( "LISTINI.dbf", aFields, "DBFCDX" )
USE LISTINI.dbf NEW VIA "DBFCDX"
// generate periods for pricelist 1
appe blank
field->check_in:="17/05/2018"
field->check_out:="27/06/2018"
field->guest="BASSA"
field->price_list="PL1"
appe blank
field->check_in:="30/08/2018"
field->check_out:="20/09/2018"
field->guest="BASSA"
field->price_list="PL1"
appe blank
field->check_in:="28/06/2018"
field->check_out:="25/07/2018"
field->guest="MEDIA"
field->price_list="PL1"
appe blank
field->check_in:="26/07/2018"
field->check_out:="29/08/2018"
field->guest="ALTA"
field->price_list="PL1"
// generate periods for pricelist 2
appe blank
field->check_in:="01/05/2018"
field->check_out:="31/05/2018"
field->guest="BASSA"
field->price_list="PL2"
appe blank
field->check_in:="01/06/2018"
field->check_out:="30/06/2018"
field->guest="ALTA"
field->price_list="PL2"
appe blank
field->check_in:="15/08/2018"
field->check_out:="29/09/2018"
field->guest="BASSA"
field->price_list="PL2"
appe blank
field->check_in:="01/07/2018"
field->check_out:="31/07/2018"
field->guest="MEDIA"
field->price_list="PL2"
appe blank
field->check_in:="01/08/2018"
field->check_out:="14/08/2018"
field->guest="ALTA"
field->price_list="PL2"
close data
return nil
Re: calculate days
Posted: Wed Jan 09, 2019 11:38 am
by Silvio.Falconi
thanks
Re: calculate days
Posted: Wed Jan 09, 2019 8:46 pm
by MGA
**********************************************
* para comparar datas com hora inicial e final
* $DOC$
* $FUNCNAME$
* FT_ELAPSED()
* $CATEGORY$
* Date/Time
* $ONELINER$
* Return elapsed time between two days and/or times
* $SYNTAX$
* FT_ELAPSED([ <dStart> ], [ <dEnd> ], ;
* <cTimeStart>, <cTimeEnd>) -> aTimedata
* $ARGUMENTS$
* <dStart> is any valid date in any date format. Defaults to DATE().
*
* <dEnd> is any valid date in any date format. Defaults to DATE().
*
* <cTimeStart> is a valid Time string of the format 'hh:mm:ss' where
* hh is hours in 24-hour format.
*
* <cTimeEnd> is a valid Time string of the format 'hh:mm:ss' where
* hh is hours in 24-hour format.
* $RETURNS$
* A two-dimensional array containing elapsed time data.
* $DESCRIPTION$
* FT_ELAPSED() calculates the elapsed time between two Date/Time events.
*
* It returns an array which contains the following data:
*
* aRetVal[1,1] Integer Days aRetVal[1,2] Total Days (nn.nnnn)
* aRetVal[2,1] Integer Hours aRetVal[2,2] Total Hours (nn.nnnn)
* aRetVal[3,1] Integer Minutes aRetVal[3,2] Total Minutes (nn.nnnn)
* aRetVal[4,1] Integer Seconds aRetVal[4,2] Total Seconds (nn)
* $EXAMPLES$
* FT_ELAPSED(CTOD('11/28/90'), CTOD('11/30/90'), '08:00:00', '12:10:30')
* will return:
*
* aRetVal[1,1] -> 2 (Days) aRetVal[1,2] -> 2.1740 Days
* aRetVal[2,1] -> 4 (Hours) aRetVal[2,2] -> 52.1750 Hours
* aRetVal[3,1] -> 10 (Minutes) aRetVal[3,2] -> 3130.5000 Minutes
* aRetVal[4,1] -> 30 (Seconds) aRetVal[4,2] -> 187830 Seconds
* $END$
FUNCTION FT_ELAPSED(dStart, dEnd, cTimeStart, cTimeEnd)
LOCAL nTotalSec, nCtr, nConstant, nTemp, aRetVal[4,2]
IF ! ( VALTYPE(dStart) $ 'DC' )
dStart := DATE()
ELSEIF VALTYPE(dStart) == 'C'
cTimeStart := dStart
dStart := DATE()
ENDIF
IF ! ( VALTYPE(dEnd) $ 'DC' )
dEnd := DATE()
ELSEIF VALTYPE(dEnd) == 'C'
cTimeEnd := dEnd
dEnd := DATE()
ENDIF
IF( VALTYPE(cTimeStart) != 'C', cTimeStart := '00:00:00', )
IF( VALTYPE(cTimeEnd) != 'C', cTimeEnd := '00:00:00', )
nTotalSec := (dEnd - dStart) * 86400 + ;
VAL(cTimeEnd) * 3600 + ;
VAL(SUBSTR(cTimeEnd,AT(':', cTimeEnd)+1,2)) * 60 + ;
IF(RAT(':', cTimeEnd) == AT(':', cTimeEnd), 0, ;
VAL(SUBSTR(cTimeEnd,RAT(':', cTimeEnd)+1))) - ;
VAL(cTimeStart) * 3600 - ;
VAL(SUBSTR(cTimeStart,AT(':', cTimeStart)+1,2)) * 60 - ;
IF(RAT(':', cTimeStart) == AT(':', cTimeStart), 0, ;
VAL(SUBSTR(cTimeStart,RAT(':', cTimeStart)+1)))
nTemp := nTotalSec
FOR nCtr = 1 to 4
nConstant := IF(nCtr == 1, 86400, IF(nCtr == 2, 3600, IF( nCtr == 3, 60, 1)))
aRetVal[nCtr,1] := INT(nTemp/nConstant)
aRetval[nCtr,2] := nTotalSec / nConstant
nTemp -= aRetVal[nCtr,1] * nConstant
NEXT
RETURN aRetVal
Re: calculate days
Posted: Thu Jan 10, 2019 8:33 am
by Silvio.Falconi
Dear Ing. Anton Lerchster,
on my database I have the filed date
if ! File( "periodi.dbf" )
aStructure = { { "date" , "D", 8, 0 },;
{ "rooms_id" , "C", 4, 0 },;
{ "check_in" , "D", 8, 0 },;
{ "check_out", "D", 8, 0 },;
{ "status" , "C", 2, 0 },;
{ "guest" , "C", 30, 0 } }
DBCreate( "periodi", aStructure, "DBFCDX" )
ENDIF
If I made
Code: Select all
function Create_Testfile()
local aFields := { { "date" , "D", 8, 0 },;
{ "rooms_id" , "C", 4, 0 },;
{ "check_in" , "D", 8, 0 },;
{ "check_out", "D", 8, 0 },;
{ "status" , "C", 2, 0 },;
{ "guest" , "C", 30, 0 } }
REQUEST DBFCDX
DbCreate( "periodi.dbf", aFields, "DBFCDX" )
USE PERIODI.dbf NEW VIA "DBFCDX"
// generate periods for pricelist 1
appe blank
field->check_in:=ctod("17/05/2018")
field->check_out:=ctod("27/06/2018")
field->guest="BASSA"
field->rooms_id="01"
appe blank
field->check_in:=ctod("30/08/2018")
field->check_out:=ctod("20/09/2018")
field->guest="BASSA"
field->rooms_id="01"
appe blank
field->check_in:=ctod("28/06/2018")
field->check_out:=ctod("25/07/2018")
field->guest="MEDIA"
field->rooms_id="01"
appe blank
field->check_in:=ctod("26/07/2018")
field->check_out:=ctod("29/08/2018")
field->guest="ALTA"
field->rooms_id="01"
// generate periods for pricelist 2
appe blank
field->check_in:=ctod("01/05/2018")
field->check_out:=ctod("31/05/2018")
field->guest="BASSA"
field->rooms_id="02"
appe blank
field->check_in:=ctod("01/06/2018")
field->check_out:=ctod("30/06/2018")
field->guest="ALTA"
field->rooms_id="02"
appe blank
field->check_in:=ctod("15/08/2018")
field->check_out:=ctod("29/09/2018")
field->guest="BASSA"
field->rooms_id="02"
appe blank
field->check_in:=ctod("01/07/2018")
field->check_out:=ctod("31/07/2018")
field->guest="MEDIA"
field->rooms_id="02"
appe blank
field->check_in:=ctod("01/08/2018")
field->check_out:=ctod("14/08/2018")
field->guest="ALTA"
field->rooms_id="02"
close data
return nil
room_id is the code of price_list sample "01"
It not appe nothing why
Re: calculate days
Posted: Thu Jan 10, 2019 8:59 am
by Silvio.Falconi
Now run I add
SET DATE FORMAT "dd/mm/yyyy"
SET DATE ITALIAN
SET CENTURY ON
SET EPOCH TO ( YEAR( DATE() ) - 50 )