New FTDN January/Enero 2012 (FWH 12.01)

[Antonio Linares]

January 2012
============

* Enhancement: FWH debugger now shows the SETs values, so their values can be inspected.
Requested in the forums: http://forums.fivetechsupport.com/viewt ... 41#p124441

* Enhancement: FWH debugger Profiler support so we can inspect which procedures are consuming
more time and number of calls:

http://forums.fivetechsupport.com/viewt ... 66#p124466

* Enhancement: FWH debugger already inspects locals, statics, publics and privates variables.

http://forums.fivetechsupport.com/viewt ... 75#p124475

* Fix: Class TButton, Alt+... <hotkey> was not working since FWH 11.11. Now it is ok:

http://forums.fivetechsupport.com/viewt ... 71&start=0

* Fix: Disabled TBtnBmp buttons were firing actions, now it is ok, The actions should not be
fired. Thanks to Andre:

http://forums.fivetechsupport.com/viewt ... 14#p125014

* Fix: Buttons were not properly setting the focus when placed on folders, due to recent
changes. Now it is ok:

http://forums.fivetechsupport.com/viewt ... 06#p125106

* New: OpenGL first examples in samples\opengl.prg. To build it use: samples\buildgl.bat opengl.
It only works with MinGW gcc for now. Press "P" to activate the "perspective" mode.

* Fix: Radio Buttons were closing non modal dialogs. Now it is ok:

http://forums.fivetechsupport.com/viewt ... 13#p125213

* New: Class TTagCloud, shows a Tags Cloud with different fonts sizes based on the tags weigth.
Please review samples\TagCloud.prg. Thanks to Paco García from CanalFive! canalfive@gmail.com

http://forums.fivetechsupport.com/viewt ... 28#p125528

* New: Harbour builds and xHarbour builds available from (2012 January 27):

http://code.google.com/p/harbour-and-xh ... loads/list

[ADutheil]

Hi Antonio,
Could you provide new harbour build for mingw too please?

[Antonio Linares]

André,

Already available from:
http://code.google.com/p/harbour-and-xh ... p&can=2&q=

[ADutheil]

Got it. Thanks.

[nnicanor]

Antonio,

I can't see harbour for MSVC 2010 32bits

Regards,

Nicanor

[nnicanor]

Could you provide new harbour build for MSVC 2010 32bits ?


Regards,

Nicanor

[Antonio Linares]

Here it is:

http://code.google.com/p/harbour-and-xh ... p&can=2&q=

[Orbex]

Hola Antonio

Recien la semana pasada acabo de adquirir la version 11.12, tengo derecho a esta recien salida nueva version ?

Gracias

[acuellar]

Antonio

La libreria rtl.lib de la ultima revision de xHarbour no deja exportar con ToExcel()

* New: Harbour builds and xHarbour builds available from (2012 January 27):

Saludos,

Adhemar

[Antonio Linares]

Adhemar,

Que error dá ? Falta alguna libreria ? Has usado alguna libreria de la versión anterior ?

[Antonio Linares]

Orbex,

Cuando compras un producto ó una actualización tienes derecho a dos meses más de actualizaciones usando las claves que se te envían por email

[acuellar]

Que error dá ? Falta alguna libreria ? Has usado alguna libreria de la versión anterior ?

El error es: El SISTEMA.EXE ha dejado de funcionar

He usado una del 06/10/2010 y no da error

Gracias.

Saludos,

Adhemar

[mag071]

Saludos ;

en la version 12.01 como en la 11.12 , al momento de hacer
oBrw:Report() //xbrowse report
me dice

prev32.dll not found

lo extraño es que ejecuto el ejemplo testxbr3.prg y este si me muestra el reporte sin problema alguno.

aqui dejo el .rmk que uso

PROJECT : elot.exe

elot.exe : $(PRG:.PRG=.OBJ) $(C:.C=.OBJ) elot.res
echo off
echo $(BCDIR)\lib\c0w32.obj + > b32.bc
echo obj\elot.obj obj\tvende.obj obj\tzona.obj obj\tmov004.obj obj\tdist.obj + >> b32.bc
echo obj\tlistn.obj obj\tuser.obj obj\tsocio.obj obj\tcelu.obj + >> b32.bc
echo obj\tcupos.obj obj\tpremios.obj obj\tmov001.obj obj\tmov002.obj + >> b32.bc
echo obj\tmov003.obj obj\tlotsort.obj obj\tfact.obj obj\tformasp.obj , + >> b32.bc
echo elot.exe, + >> b32.bc
echo elot.map, + >> b32.bc
echo lib\Eagle1.lib lib\mysql.lib + >> b32.bc
echo $(FWDIR)\lib\FiveH.lib $(FWDIR)\lib\FiveHC.lib + >> b32.bc
echo $(HBDIR)\lib\hbrtl.lib + >> b32.bc
echo $(HBDIR)\lib\hbvm.lib + >> b32.bc
echo $(HBDIR)\lib\gtgui.lib + >> b32.bc
echo $(HBDIR)\lib\hblang.lib + >> b32.bc
echo $(HBDIR)\lib\hbmacro.lib + >> b32.bc
echo $(HBDIR)\lib\hbrdd.lib + >> b32.bc
echo $(HBDIR)\lib\rddntx.lib + >> b32.bc
echo $(HBDIR)\lib\rddcdx.lib + >> b32.bc
echo $(HBDIR)\lib\rddfpt.lib + >> b32.bc
echo $(HBDIR)\lib\hbsix.lib + >> b32.bc
echo $(HBDIR)\lib\hbdebug.lib + >> b32.bc
echo $(HBDIR)\lib\hbcommon.lib + >> b32.bc
echo $(HBDIR)\lib\hbpp.lib + >> b32.bc
echo $(HBDIR)\lib\hbwin.lib + >> b32.bc
echo $(HBDIR)\lib\hbcpage.lib + >> b32.bc
echo $(HBDIR)\lib\hbcplr.lib + >> b32.bc
echo $(HBDIR)\lib\hbct.lib + >> b32.bc
echo $(HBDIR)\lib\xhb.lib + >> b32.bc
echo $(HBDIR)\lib\hbziparc.lib + >> b32.bc
echo $(HBDIR)\lib\hbmzip.lib + >> b32.bc
echo $(HBDIR)\lib\hbzlib.lib + >> b32.bc
echo $(HBDIR)\lib\minizip.lib + >> b32.bc
echo $(HBDIR)\lib\png.lib + >> b32.bc

rem Uncomment these two lines to use Advantage RDD
rem echo $(HBDIR)\lib\rddads.lib + >> b32.bc
rem echo $(HBDIR)\lib\Ace32.lib + >> b32.bc
echo $(BCDIR)\lib\cw32.lib + >> b32.bc
echo $(BCDIR)\lib\import32.lib + >> b32.bc
echo $(BCDIR)\lib\ws2_32.lib + >> b32.bc
echo $(BCDIR)\lib\psdk\psapi.lib + >> b32.bc
echo $(BCDIR)\lib\psdk\odbc32.lib + >> b32.bc
echo $(BCDIR)\lib\psdk\nddeapi.lib + >> b32.bc
echo $(BCDIR)\lib\psdk\iphlpapi.lib + >> b32.bc
echo $(BCDIR)\lib\psdk\msimg32.lib + >> b32.bc
echo $(BCDIR)\lib\psdk\rasapi32.lib + >> b32.bc
echo $(BCDIR)\lib\psdk\gdiplus.lib + >> b32.bc
echo $(BCDIR)\lib\psdk\shell32.lib, >> b32.bc


IF EXIST elot.res echo elot.res >> b32.bc
$(BCDIR)\bin\ilink32 -Gn -aa -Tpe -s @b32.bc
del b32.bc

.PRG.OBJ:
$(HBDIR)\bin\harbour $< /L /N /W /Oobj\ /I$(FWDIR)\include;$(HBDIR)\include
$(BCDIR)\bin\bcc32 -c -tWM -I$(HBDIR)\include -oobj\$& obj\$&.c

.C.OBJ:
echo -c -tWM -D__HARBOUR__ -DHB_API_MACROS > tmp
echo -I$(HBDIR)\include;$(FWDIR)\include >> tmp
$(BCDIR)\bin\bcc32 -oobj\$& @tmp $&.c
del tmp

elot.res : elot.rc
$(BCDIR)\bin\brc32.exe -r elot.rc


Agradecido de antemano.-

[carlos vargas]

Antonio

Code: Select all

function main()
  ?file("prev32.dll") // .T.
  set defa to .\datos   
  ?file("prev32.dll") // .F.
  set path to .\        // solucion, apuntar el path a la carpeta actual, parece que antes no era necesario.
  ?file("prev32.dll") // .T.
return
 

anteriormente este codigo retornaba .t. las 3 ocaciones.

salu2

[mag071]

_;

Efectivamente coloco set path to .\
y ahora me muestra el preview.

Muy Agradecido.-